Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
32
Use 2 anti-tip brackets for each in-
dividual refrigeration appliance or 4
anti-tip brackets for each (side-by-
side) combination of 2 appliances.
Position the anti-tip brackets on
the left and right of the building-in
niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 2134–2164mm from
the floor of the niche.
Risk of injury and damage due to
tipping refrigeration appliance.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the refrigeration appliance.
The distance between the
anti-tip brackets and the refrigeration
appliance must not exceed 8mm.
Make sure that the gap between the
refrigeration appliance‘s rear wall and
the building-in niche does not exceed
51mm.
Place a wooden wedge behind the
anti-tip brackets if necessary.
While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the building-in
niche.
Loading ...
Loading ...
Loading ...