Loading ...
Loading ...
Loading ...
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Minutes, seconds
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Countdown starts)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
You can reset a paused countdown to
its start time, by pressing (A).
3. Press any button to stop the tone.
Timer Countdown Indication
30 minutes before the end of a timer operation
is reached, a countdown start tone sounds
and the function hand starts to indicate the
remaining time until the end of the timer
operation.
●
The countdown start tone will not sound
when the timer start time is 30 minutes or
less.
Function hand
Note
●
You can use the procedure below to
enable or disable the countdown start
tone.
l
Disabling the Countdown Start
Tone
●
During a period within 30 minutes of
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Using CASIO WATCHES to
Adjust Hand Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
alignment.
l
Adjusting Hand Alignment
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This starts the function hand indicator
alignment operation.
After five secondsAfter 3.5 seconds
Function hand
3. If the function hand is not aligned with 12
o’clock, use (B) and (D) to align it.
Watch Operation Guide 5698
23
Loading ...
Loading ...
Loading ...