Loading ...
Please read instructions carefully before installation and use. Installation
should be performed by a professional installer. To ensure your safety,
the driver should not watch videos or operate features on the monitor
while driving. There are no serviceable parts in this unit, do not
disassemble or try to repair this unit. If the unit malfunctions please
return to your vendor or send to a Pyle repair facility. Please observe and
obey the local laws and regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the
vehicle's safety features, wiring, components, etc. We are not responsible
for any damages, injury, malfunctions or otherwise noted due to faulty or
non‐professional installation.
Connection
Connect the camera’s threaded locking 4‐pin cable connectors into the
female receiving connection of the included 4‐pin extension cables. The
extension cables then connect to your compatible video monitors with
4‐pin receiving connectors. The threaded locking cable connectors of the
camera serve to provide power and video for all cameras.
(camera 1 channel 1, camera 2 channel 2, camera 3 channel 3,
camera 4 channel 4)
Please remember to disconnect your vehicle's battery prior to any
connection / installation. Use the included wiring harness
to provide power and video signals to your monitor. There are colored
wires to assist in the video camera system setup. See the wiring diagram
for connections between cameras, monitor and your vehicle.
Loading ...
Loading ...
Loading ...