Loading ...
Loading ...
Loading ...
Maintenance
Read section titled “Safety Warnings” before maintaining tool.
1. With battery removed or cord disconnected, make daily inspection to ensure free movement of
nosepiece and trigger.
Do not use tool if nosepiece or trigger sticks or binds.
2. Lubrication of the feed system is not necessary. DO NOT OIL.
3. Wipe tool clean daily and inspect for wear, especially the bit and nosepiece. Replace as necessary.
WARNING
Repairs other than those described here should be performed only by trained,
qualified personnel. Contact SENCO for information at 1-800-543-4596.
Accessories
SENCO offers a full line of DuraSpin screws and accessories for your SENCO tools, including:
• Bits
• Storage Bag
• Assorted Nosepieces
• Safety Glasses
For more information or a fully illustrated catalogue of Senco accessories, contact your sales
representative or call Senco at 1-800-543-4596.
Technical Specifications
Table 4 - DS242-AC Tech Specs
VOLTAGE 120V
CURRENT 6 AMPS
RPM 0-2500 REV/MIN
WEIGHT 5.65 LBS.
HEIGHT 9.65"
LENGTH 16.35"
WIDTH 3.23"
FASTENER CAPACITY 50 SCREWS (1 STRIP)
FASTENER LENGTH 1-2"
FASTER RANGE #6-#12
Table 5 - DS245-AC Tech Specs
VOLTAGE 120V
CURRENT 6 AMPS
RPM 0-5000 REV/MIN
WEIGHT 5.54 LBS.
HEIGHT 9.65"
LENGTH 16.34"
WIDTH 3.23"
FASTENER CAPACITY 50 SCREWS (1 STRIP)
FASTENER LENGTH 1-2"
FASTER RANGE #6-#10
Table 6 - DS342-AC Tech Specs
VOLTAGE 120V
CURRENT 6 AMPS
RPM 0-2500 REV/MIN
WEIGHT 5.68 LBS.
HEIGHT 9.65"
LENGTH 17.17"
WIDTH 3.23"
FASTENER CAPACITY 50 SCREWS (1 STRIP)
FASTENER LENGTH 1-3"
FASTER RANGE #6-#12
15
TOOL OPERATION
10
Loading ...
Loading ...
Loading ...