Loading ...
Loading ...
Loading ...
HEAT CONTROL SWITCH
The control switch positions are:
0 Off
I Low Heat
II Medium Heat (Turn Low Heat Off first)
III High Heat (Low and Medium together)
Check that the Heat Control Switch is set to Off position before plugging the heater
into the mains supply. For greater economy, use the High Heat setting initially and
then switch to the Low Heat setting.
FAN FUNCTION
In addition to the three heat settings there is a fan with a separate On/Off switch
located on the control panel. The fan function is for distributing heat into the room at
a faster rate.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn
the knob anti-clockwise until the heater just turns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
4. Take note of this setting position for future use.
Operating Your Convector Heater
Loading ...
Loading ...
Loading ...