Loading ...
Loading ...
Loading ...
2.
X
Hold down the (A) button for about 2
seconds.
This will cause the watch to enter the
Calendar Mode.
3.
X
Hold down the (D) button for about 1.5
seconds until the second hand points to
“R”.
The second hand will move to “C” when a
connection is established between the
watch and phone, and then the phone’s
ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use G-SHOCK Connected to specify
the amount of time until a Bluetooth
connection is automatically terminated, to
enable or disable the watch operation tone,
and to configure other settings.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Returning the Watch to Its
Factory Default Settings
Using G-SHOCK Connected to reset the
watch returns to the settings below.
●
Stopwatch elapsed time: 0 hours, 0
minutes, 0 seconds
●
Countdown Timer time: 0 hours, 10 minutes
●
Alarm
ー
Alarm time: 12:00 midnight
ー
Alarm setting: Off
●
Mute setting: Off
●
Connection time: 3 minutes
●
Auto adjust: Off
1.
X
Pull out the crown to the second click.
2.
X
Hold down (C) for about 5 seconds.
Resetting watch settings causes the
second hand to move to 12 o’clock.
Second hand
3. Push the crown back in.
Changing the Home City
Summer Time Setting
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to change the summer time
setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with G-SHOCK Connected.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Use G-SHOCK Connected to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, perform the procedure
under “
C
Pairing the watch with a phone”
to pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X
While the second hand is not pointing to
“C”, hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
Operation Guide 5513
9
Loading ...
Loading ...
Loading ...