Loading ...
Loading ...
Loading ...
2
Step 4: Check the leaks and flush the filter
1. In the event of water leakage, turn off the water supply. If the water leakage is occurring at position 1, wrap
Teflon tape on the external thread. If the water leakage is occurring at position 2, 3 or 4, check whether the tubing
is fully inserted into the fittings. If not, insert it again until you reach the mark on the tubing.
2. Flush the filter for 5 minutes before use.
Hot Cold
Filter system
Inlet
Outlet
1
2
3 4
To disconnect
Use your thumb and index finger to press down on the lock sleeve. Use your other hand to pull out the hose from
the fitting.
Note: Please do not pull out the tubing directly, or else it will damage the fitting and cause leakage.
Press
Pull
Press
Filter replacement
1. It’s recommended to turn off the water supply and turn on
the faucet to release the water pressure.
2. Rotate 1/4 turn to the left to remove the filter.
3. Take out the new filter and remove the protective cap.
4. Rotate 1/4 turn to the right to install the filter. Ensure that
the filter’s triangle mark is aligned with the connection mark.
5. Turn on the cold water valve and flush for 5 minutes.
Remove the filter Install the filter
Loading ...
Loading ...
Loading ...