Loading ...
Loading ...
Loading ...
8
1. Put the work bowl (1) onto the self-detect base (2).
Note: You will hear an audible click when the work bowl is it is locked into position.
2. Choose your type of processing:
To Chop:
• Pick up the multi-use blade by the hub to avoid direct contact with the blades. Lower the
multi-use blade in place over the center shaft in the bowl.
To Slice or Shred:
• Pick the slicing/shredding disc up by the finger holes to avoid direct contact with the
slicing blade. Lower the center disc hub onto the drive shaft. The hub will sit down over
the drive gear.
3. Secure the snap-on lid to the work bowl.
Note: You will hear two audible “clicks”.
NOTE: Make sure both tabs on the snap-on lid are snapped onto the work bowl, just like
the lid on your blending container.
4. Insert the pin on the large food pusher into the opening in the snap-on
lid. Push the large food pusher all the way down into the opening until
it stops.
5. Insert the small food pusher into the food chute opening in the large
food pusher.
NOTE: The food processor will not operate until the lid and large food pusher
are properly secured in place.
1
3
“click”
“click” x 2
5
4
OR
2
Loading ...
Loading ...
Loading ...