Loading ...
Loading ...
Loading ...
ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
locked position.
2. Press the wand release button and lift up
the wand for above floor cleaning.
3. Choose the desired attachment and
insert it into the wand.
4. Once the vacuum is on, operate the
vacuum cleaner by tilting the wand back
towards you and the nozzle is flush with
floor surface.
NOTE:
Brushroll does not rotate in either
mode when handle is in fully upright
position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE:
Select the right mode when
using this vacuum cleaner. Do not press the
switch to the “II” position when cleaning
the bare floor, otherwise it will damage
the floor.
BRUSHROLL INDICATOR LIGHT
4. Turn on the vacuum cleaner by pressing
the switch to the “I” position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE:
The attachment also can insert
directly into the handle for above floor
cleaning.
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
- 12 -
OPERATION MODES
Light Color
Status
Green,
Continuous
The brushroll is spinning and
working as it should.
Red,
Continuous
There is a jam in the brushroll
area. Turn off and unplug
the vacuum, and remove any
blockages in the nozzle.
No Light The brushroll is off.
Brushroll
Indicator
Light
Wand Release Button
Handle
3-in-1 Combination
Tool
3-in-1 Combination
Tool
Wand
Loading ...
Loading ...
Loading ...