Loading ...
Loading ...
Loading ...
8
ADJUSTMENT GUIDE
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride,
you must ensure that the bike is stabled and
secured. If you notice that the bike is unbalanced
during use, you should adjust the Read End Caps
(No. 21) located on the rear stabilizer until the bike
becomes levelled with the floor surface.
ADJUSTING THE SEAT
The Seat (No. 31) of this bike is fully adjustable as it
moves Up, Down, Fore (forward), Aft (backward).
To adjust the height of the Seat Tube (No. 6),
loosen and pull the Knob (No. 24) outward, then
raise or lower the Seat (No. 31) to the desired
height. Once adjusted, re-insert and tighten the
Knob (No. 24) to secure the Seat (No. 31) in place.
To adjust the Seat (No. 31) back and forth, loosen
the Knob (No. 26) and slide the Seat Slider (No. 7)
to the desired position. Then tighten the Knob (No.
26) to secure the Seat Slider (No. 7) in place.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension
Controller (No. 18a) clockwise to increase the level
of resistance. Rotate the Tension Controller (No.
18a) counter-clockwise to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest
and Level 8 being the highest.
MOVING THE BIKE
Hold the bike by the Handlebar (No. 5) and press
down until the Transportation Wheels (No. 32)
touch the ground. With the Transportation Wheels
(No. 32) on the ground, you can transport the bike
to the desired location with ease.
Loading ...
Loading ...
Loading ...