Loading ...
Loading ...
Loading ...
6
6. Adjust the telescopic stack with sixteen screws and
washer (pre-installed). Refer to Figure 5.
7. Align the telescopic stack to the mounting screws on
the ceiling and lock the telescopic stack in place.
Fasten the mounting screws as shown in Figure 6.
8. Slide the duct covers up the telescopic stack, and
temporary hold the duct covers up.
CAUTION: MAKE SURE THE TELESCOPIC
STACK IS SECURE BEFORE RELEASING.
9. Remove the four screws and washers from top of the
hood body. Position and install the glass canopy
onto the hood body with the four screws and washer.
10. Install the two flappers (provided) onto the exhaust.
Refer to Figure 7.
11. Align the hood with the telescopic stack and secure
the hood body onto the telescopic stack with sixteen
4mm x 8mm screw (provided). Refer to Figure 8.
CAUTION: MAKE SURE THE HOOD IS
SECURE BEFORE RELEASING.
Figure 5
Figure 6
Figure 7
Figure 8
Telescopic Stack Installation
Hood Installation
Loading ...
Loading ...
Loading ...