Loading ...
Loading ...
Loading ...
Page 7
Control Panel - The control panel display shows the current operational status of the
unit.
ON/OFF Button - Pressing this button on your control panel engages or shuts
down your KwiKool system. All settings selected are stored in the microprocessor
board even if the power is lost including the ON/OFF selection. Refer to the
Troubleshooting Guide section of this manual if your KwiKool is alerting an alarm
after selecting ON.
MODE Button - Depressing the MODE button selects your choice of operations.
Cool, for cooling with compressor operation. “Cool” will flash when the compres-
sor is running. “Cool“ will not flash when the room temperature is equal to or lower
than the set temperature or the system is timing out. Heat, for heating with
compressor operation. “Heat” will flash when the compressor is running. “Heat”
will not flash when the room temperature is equal to or higher than the set
temperature or the system is timing out. Heat/Cool mode when conditioning is
required in applications with changing load requirements. The system automatically
selects the mode based on the set point and flashes the current operating function
unless the set point is satisfied or the system is timing out. Fan, for air circulation
without compressor operation.
F/C - Selects the way that room temperature and set point are displayed on the
control panel. Choices are Fahrenheit or Celsius. F is the factory default. This
indicator will flash when the system is in “time out” to prevent compressor short
cycling.
Fan - Pressing the fan key cycles the supply air fan between auto fan and fan on.
When the system is in auto fan, the supply air fan only operates when the
compressor is running. When the fan is set to on, the fan runs continuously as long
as the unit is in the ON position. The fan speed window will be blank on these
models.
B.
1.
2.
3.
+
-
FAN
F
Cool
OFF
Fan
Display Shows - Current Temperature,
Set Temperature, or Alarm Codes
Display Shows - Unit Mode
Cool / Fan
Display Shows - Fan Speed (except single speed)
Display Shows - On / Off
Display Shows - Fan Mode
4.
Loading ...
Loading ...
Loading ...