Loading ...
Loading ...
Loading ...
STRING TRIMMER ATTACHMENT—STA1500 29
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
String trimmer fails
to start.
The battery pack is not
attached to the power
head.
Attach the battery pack to the power
head.
No electrical contact
between the power head
and the battery pack.
Remove battery, check contacts
and reinstall the battery pack until it
snaps into place.
The battery pack is
depleted.
Charge the battery pack with EGO
chargers listed in this manual.
The lock-off lever and
trigger are not depressed
simultaneously.
Press the lock-off lever and hold it,
then depress the trigger to turn on
the string trimmer.
String trimmer
stops while cutting.
The guard is not mounted
on the trimmer, resulting in
an overly long cutting line
and motor overload.
Remove the battery pack and mount
the guard on the trimmer.
Heavy cutting line is used.
Use recommended nylon cutting line
with diameter no greater than
0.095 in. (2.4 mm).
The motor shaft or trimmer
head is bound with grass.
Stop the trimmer, remove the
battery, and remove the grass from
the motor shaft and trimmer head.
The motor is overloaded.
Remove the trimmer head from the
grass. The motor will recover as
soon as the load is removed. When
cutting, move the trimmer head in
and out of the grass to be cut and
remove no more than 8 inches of
length in a single cut.
The battery pack or string
trimmer is too hot.
Allow the battery pack or trimmer
to cool until the temperature drops
below 152°F (67°C).
The battery pack is
disconnected from the tool.
Re-install the battery pack.
The battery pack is
depleted.
Charge the battery pack with EGO
chargers listed in this manual.
Loading ...
Loading ...
Loading ...