Loading ...
Loading ...
Loading ...
LAUNCH X-431 EuroPro5 User Manual
78
A. If it is the first time you have operated this printer, please proceed the
following:
1. For initial use, you are suggested to reset the printer: Press and hold [MODE]
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
2. Tap
Reset
to configure Wi-Fi printer.
Step 1: Connect the printer:
Tap
Scan
to start scanning and select the desired printer hotspot named with
X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap
Connect
to enter Step 2.
Step 2: Join the Wi-Fi printer into LAN:
Tap
Scan
to select the desired local Wi-Fi network from the list, and type in
the security password (If it is an open network, password is not required), and
then tap
Confirm
.
3. Once the Wi-Fi network of the printer is connected and the printer is found,
tap
Printing test
to test the printing.
Now the Wi-Fi printer is ready for printing.
If the printer is not found, please reset the printer to default factory settings (refer
Loading ...
Loading ...
Loading ...