Loading ...
Loading ...
Loading ...
UM ColorVu DS-2CExxHFT-Fxx 122919NA 12
NOTE: The supplied screw package contains self-
tapping screws and expansion bolts.
Route the cables through the cable hole or side
opening.
Re-install and secure camera to the mounting base.
Figure 18, Install the Camera Back
Connect the corresponding cables such as power
cord and video cable.
Power on the camera to check if the image on the
monitor is at an optimum angle. If not, adjust the
camera according to the figure below to get an
optimum angle.
Figure 19, 3-Axis Adjustment
1) Rotate the enclosure to adjust the pan position [0°
to 360°].
2) Move the camera body up and down to adjust the
tilt position [0° to 75°].
3) Rotate the main body to adjust the rotation position
[0° to 360°].
2.4 Ceiling/Wall Mounting with Junction Box
Before You Start
You need to purchase a junction box in advance. Ceiling
mounting and wall mounting are similar. The following
uses wall mounting as an example.
Paste the drill template on the wall.
Drill screw holes and cable hole (optional) according
to the drill template.
Loading ...
Loading ...
Loading ...