Loading ...
Loading ...
Loading ...
5
3. CUSTOM HOOD PREPARATION
WARNING
!
When building a custom hood, always follow all applicable construction codes and standards. The custom hood
must be positively secured to wall studs or other wooden framework behind the drywall. Make sure the cabinet is
capable of supporting its own weight and the weight of the power pack. Failure to do so may cause personal injury
or damage to countertop or cooktop.
The custom hood must be constructed to fit
the shape and total weight of the BC2130SS or
BC4130SS power pack models.
See chart and illustrations for details.
HK0105A
BACK VIEW SIDE VIEW
26
5
/8”
5/16”
11/16”
3 ³/8”
7
5
/16”
11¼”
10
5
/16”
TOP VIEW
24
7
/8”
27
5
/8”
POWER PACK TYPE TOTAL WEIGHT
SINGLE BLOWER 28 LB.
DUAL BLOWER 34 LB.
4. CUT THE HOLE IN CUSTOM HOOD BASE
Cut a hole in the bottom of the custom hood, using the dimensions shown at right.
NOTE: The minimum distance from the rearmost cutout edge to the wall should be 1/2’’.
26¾”
10½”
HD0341A
The recommended minimum thickness for the
custom hood base is 5/8”. The custom hood sides
and front thickness are at the installer’s discretion.
5. REMOVE FILTER
Rest the power pack on a table. Remove tape on filter. Using finger cup, lift filter from power pack
by pushing it towards the back (1) and rotate (2), then set filter aside.
HD0359
1
2
Loading ...
Loading ...
Loading ...