Greenworks ST60B212

Owner Manuals - Page 10

For ST60B212.

PDF File Manual, 28 pages, Read Online | Download pdf file

ST60B212 photo
Loading ...
Loading ...
Loading ...
9.7 CUTTING TIPS
Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
Move the machine from right to left to prevent thrown
debris toward the operator.
Do not cut in the dangerous area.
Do not force the trimmer head into uncut grass.
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
DIRECTION OF
ROTATION
BEST
CUTTING AREA
DANGER
AREA
Cut-off
blade
10 MAINTENANCE
IMPORTANT
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or do the
maintenance work on the machine.
IMPORTANT
Make sure that all nuts, bolts and screws are tight. Examine
regularly that you install the handles tightly.
IMPORTANT
Use only the replacement parts and accessories of the initial
manufacturer.
10.1 GENERAL INFORMATION
IMPORTANT
Only your dealer or approved service center can do the
maintenance that is not given in this manual.
Before the maintenance operations:
Stop the machine.
Remove the battery pack.
Cool the motor.
Store the machine in cool and dry place.
Use correct clothing, protective gloves and safety glasses.
10.2 CLEAN THE MACHINE
Clean the machine after use with a moist cloth dipped in
neutral detergent.
Do not use aggressive detergents or solvents to clean the
plastic parts or handles.
Keep the trimmer head free of grass, leaves, or excessive
grease.
Keep the air vents clean and free of debris to avoid
overheating and damage to the motor or the battery.
Do not spray water onto the motor and electrical
components.
10.3 REMOVE EXCESS LINE
1. Push the tabs (18) on the sides of the trimmer head at the
same time.
2. Pull and remove the spool cover (17).
3. Remove the remaining spool (19).
17
19
20
21
18
4. Clean dirt and debris from all parts. Replace spool if it is
worn or damaged.
10
English
EN
Loading ...
Loading ...
Loading ...