Loading ...
Loading ...
Loading ...
Before using your safe:
1. First, insert the key into the keypad and open the door (Figure A).
IMPORTANT: Please do not store the door keys in your safe!
2. Next, remove the battery cover plate located on the inside of the door and
install the 4 AA 1.5V batteries provided (Figure B). Replace the battery
cover.
To setup or change a passcode:
1. With door open, locate the red button on the back of door near the hinge
(Figure C). Press the red button, listen for a beep and then enter your new
user passcode. New user passcodes may be 3 to 6 digits long.
2. Immediately after entering your new code, press the “A” or “B” button on the
keypad. Your new user code is now stored.
Note: This safe stores up to 2 passcodes simultaneously; a user code and a
manager code. Entering a third code will erase the first passcode entered.
Your safe comes with a set of keys. Please do not store keys in safe!
Keep secure in a safe place.
Solid Steel Construction
Easy to Program & Operate
Resists Hand & Mechanical
Tool Attacks
Frame around the front of
Safe conceals lines that are
not cut straight along drywall
Inside Tamper-Proof Hinges
Powder-Coated Interior & Exterior
Code can be changed infinitely
Pre-Drilled Holes for Anchoring to Wall
Anchor Bolts Included
Fits between the studs; Easy to install
Quarter Master 7700 Digital Keypad
Premium Home Office Security Wall Safe
Copyright 2010 DTX International
SPECIFICATIONS
Model
Material
Bolt
Dimensions
Steel
Quarter Master
7700
22”H x 16”W x 4”D
HOW TO USE YOUR QUARTER MASTER 7700
19
Figure A
Figure B
Figure C
Loading ...
Loading ...
Loading ...