Loading ...
Loading ...
Loading ...
Action Yes No
Step 3
a Remove held jobs stored in the printer memory.
b Resend the print job.
Did the job print?
The problem is
solved.
Go to step 4.
Step 4
a Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings > General Settings > Print Recovery > Page Protect
> O
b Resend the print job.
Did the job print?
The problem is
solved.
Go to step 5.
Step 5
a Check if the cable connections to the printer and print server
are secure. For more information, see the setup documentation
that came with the printer.
b Resend the print job.
Did the job print?
The problem is
solved.
Go to step 6.
Step 6
Install additional printer memory, and then resend the print job.
Did the job print?
The problem is
solved.
Contact
customer
support.
Tray linking does not work
Notes:
• The trays can detect paper length.
• The multipurpose feeder does not automatically detect the paper size. You must set the size from the
Paper Size/Type menu.
Action Yes No
Step 1
a Open the trays, and then check if they contain paper of the
same size and type.
• Check if the paper guides are in the correct positions for
the size of the paper loaded in each tray.
• Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.
b Resend the print job.
Do the trays link correctly?
The problem is
solved.
Go to step 2.
Troubleshooting 259
Loading ...
Loading ...
Loading ...