Lumens VC-TR40W VC-TR40 Dual-Lens AI Auto-Tracking Full HD Camera with 20x Optical Zoom

User Manual - Page 12

For VC-TR40W. Also, The document are for others Lumens models: VC-TR40*

PDF File Manual, 35 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
English-11
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Zoom
Pan Left Limit
-170~0
Limit the left angle
Tilt UP Limit
0~90
Limit the upward angle
Tilt Down Limit
-30~0
Limit the downward angle
Pan Flip
On/Off
After it is activated, the Pan command
will be reverse
Tilt Flip
On/Off
After it is activated, the Tilt command
will be reverse
Preset Speed
5/ 25/ 50/ 80/ 120 deg/sec
Set the rotation speed of the cradle
head when Preset is executed
PTZ Speed Comp
On/Off
After it is activated, the Pan/Tilt moving
speed will vary from the zoom position
D-Zoom Limit
x1~x12
Set the D-zoom limit
D-Effect
Mirror
Off/ Mirror/ Flip/ Mirror+Flip
Set the mode at which the image is
turned
Auto Focus
AF Sensitivity
Low/ Middle/ High
For AF triggering speed, the higher the
sensitivity is, the faster AF is triggered
AF Frame
Center/ Full Frame/ Auto
AF frame setting, when Center was set
as AF frame, focusing will be on the
center of the screen. When Full Frame
was set as AF frame, focusing will be
calculated based on the full screen
Ethernet
DHCP
On/Off
Enable/Disable the dynamic host
configuration
IP Address
192.168.100.100
Configurable when DHCP is set to Off
Subnet mask
255.255.255.0
Gateway
192.168.100.254
Audio
Audio Enable
On/Off
Turn on/off audio output
Audio In
Line In/ Mic In
Audio Volume
0~A~10
Volume Setting
Audio Delay
On/Off
When the audio is not synchronized
with the video, enable this function to
set the audio delay time
Audio Delay
Time(ms)
-10~-500ms
Set audio delay time
Encode Sample
Rate
48 KHz(AAC)
Set the encode type and sample rate
System
Prompt
On/Off
Turn on/off the prompt information on
the display
IR Receive
On/Off
Turn on/off the infrared reception
When it is Off, the remote control will
not be able to control the camera. At
this moment, turn off and then turn on
the power to restore control of the
remote control.
IR Select
1/ 2/ 3
Camera IR Select setting must be the
same setting as the Camera Select of
the remote control to control the
camera
Loading ...
Loading ...
Loading ...