Loading ...
Loading ...
Loading ...
INTELLIGENT TEMPERATURE CONTROLLER OPERATION METHOD
Ⅱ.Set temperature required
Ⅰ.Preparation before Using:
Check the connection between power plug and electrical socket of electrical cabinet.Be sure to
operate with safe ground wire!!!
Heat press element must be securely plugged into the machine before you switch the machine
on.Plug your electrical cord into the machine. Plug electrical socket into wall plug.Turn the power
on by ipping the On/O Switch on.( Nominal voltage:220V, Max.input power:1250W )
Set the temperature and time according to the table below and get the specic corresponding
temperature and timing setting.(Temperature is measured in Degrees Fahrenheit.)
Press the “MODE”button ONCE,see the “set light” turning red.Then press
the “plus/minus key” to set the initial heating temperature.
1.
2.
A.Initial Temperature Setting ( Range:200-450℉)
Press the “MODE” button for THE SECOND TIME;see the “temperature light” turning
red.Then press the “plus or minus key” to set the highest heating temperature.
B.Highest Temperature Setting ( Range:200-450℉)
Press the “MODE” button for THE THIRD TIME;see the”time light” turning red.
Then press the “plus or minus key” to set the proper heating time.
C.Proper Heating Time Setting ( Range:0-999 sec.)
Press
Object
Mugs
Tiles
Metal board
Plate
230
230
230
230
330
330
300
355
40
40
40
150
Initial
Temperature
Highest
Temperature
Proper Heating
Time ( s )
Sublimation paper:30-50s
T-shi Paper:10-20s
T-shi 230 355
06
ASSEMBLY & USE STEPS
1
23
4 5
Tighten knob.
Rotate the heat transfer board
to the side.
Pull out the mat below, place the
clothes at on the mat, and place
the pattern on the clothes.
Turn this adjustment switch
to adjust the pressure.
05
Loading ...
Loading ...
Loading ...