Napoleon F425SBPGT-NL

Manual - Page 34

For F425SBPGT-NL.

PDF File Manual, 73 pages, Read Online | Download pdf file

F425SBPGT-NL photo
Loading ...
Loading ...
Loading ...
Operation
WARNING! Ensure all burner controls are in the OFF position before slowly turning on gas supply valve.
WARNING! Follow the lighting instructions carefully.
WARNING! Make sure the lid of the grill is OPEN while igniting.
WARNING! Do not adjust the cooking grids while the grill is hot, or operating.
!
4
3
1
2
2
3
Fig. 1
Fig. 2
Fig. 4
Flame or
IR Side
Burner
Right Centre
Burner
Left Centre
Burner
Left Burner Right Burner
Fig. 3
Igniter
lighting your grill
Is it the very first time? Perform a Burn-off
Remove warming rack and run the main burners on high for
30 minutes. It is normal for the grill to emit an odor the first
time it is lit. This odor is caused by the “burn-off” of internal
paints and lubricants used in the manufacturing process and
will not occur again.
Main Burner Lighting
1. Open grill lid.
2. Push and slowly turn any main burner knob counter clockwise to
HIGH position until pilot lights. Continue to push down on the
control knob until the burner lights and then release.
3. If the pilot does not light – immediately turn the control knob
clockwise to the OFF position. Repeat step 2.
4. If the pilot and burner will not light in 5 seconds – turn the control
knob clockwise to the OFF position. Wait 5 minutes for gas to
dissipate. Repeat steps 2 and 3, or light with a match.
(Fig. 1) .
Side Burner Lighting (if equipped)
1. Open burner cover.
2. Push and slowly turn side burner knob counter clockwise to HIGH
position until the spark lights the burner.
3. Continue to push down on the control knob until the burner lights
and then release.
4. If the burner will not ignite – turn burner control knob clockwise to
the OFF position. Wait 5 minutes. Repeat step 2 and 3.
(Fig. 2)
Infrared Side Burner Lighting (if equipped)
1. Open burner cover.
2. Push and slowly turn side burner knob counter clockwise to HIGH
position.
3. Press and hold igniter button until the burner lights, or light by
match.
4. If the burner will not ignite – turn burner control knob clockwise to
the OFF position. Wait 5 minutes. Repeat step 2 and 3.
(Fig. 3)
(Fig. 4)
Lighting with a match
1. Clip the match into the supplied lighting rod.
2. Insert the lit match through the cooking grids and sear plates
3. While turning the corresponding burner knob to high.
Napoleon.com | Freestyle Series Grills
Operation |
9
Loading ...
Loading ...
Loading ...