Loading ...
Loading ...
Loading ...
Steps
1.
Go to Conī®guraīon ā System ā System Seī«ngs ā DST .
2.
Check Enable DST.
3.
Select Start Time, End Time and DST Bias.
4.
Click Save.
9.13 Set RS-485
RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data
between the device and the computer or terminal when the communicaīon distance is too long.
Before You Start
Connect the device and computer or termial with RS-485 cable.
Steps
1.
Go to Conī®guraīon ā System ā System Seī«ngs ā RS-485 .
2.
Set the RS-485 parameters.
Note
You should keep the parameters of the device and the computer or terminal all the same.
3.
Click Save.
9.14 Set RS-232
RS-232 can be used to debug device or access peripheral device. RS-232 can realize communicaīon
between the device and computer or terminal when the communicaīon distance is short.
Before You Start
Connect the device to computer or terminal with RS-232 cable.
Steps
1.
Go to Conī®guraīon ā System ā System Seī«ngs ā RS-232 .
2.
Set RS-232 parameters to match the device with computer or terminal.
3.
Click Save.
9.15 Power Consumpīon Mode
It is used to switch the power consumpīon when the device is working.
Note
The funcīon is only supported by certain camera models.
Network Camera User Manual
77
Loading ...
Loading ...
Loading ...