Loading ...
Loading ...
Loading ...
3.4 Start working1) Start/Pause• After turning on the power switch on the side of the robot vacuum cleaner, press the Clean ( ) button on it or tap the Clean button on the app to start cleaning.• While cleaning, if you press the Clean ( ) button again or press the Pause button on the app, the robot vacuum cleaner will stop its current task.2) ChargingMethod 1: When the robot vacuum cleaner is on hold, press and hold the Clean ( ) button for 3 seconds, then it will return to the charging base to charge.Method 2: Press the Recharge ( ) button on the remote control, then the robot vacuum cleaner will go back to the charging base to charge. Method 3: Manually place it on the charging base to charge3) Auto CleaningPart 4 Cleaning and Maintenance4.1 Cleaning the side brushesClean the side brushes and replace them if they are damaged.Notes: Before replacing the side brushes, check the “L” & “R” marked on the two side brushes and make sure they match the correspond-ing marking at the bottom of the robot vacuum cleaner.4.2 Cleaning the main brush • Turn off the robot vacuum cleaner. Press the two tabs on the main brush cover to remove the cover and then remove the main brush on the right. Use the cleaning brush to remove hair and other dirt from the main brush.• Rinse the main brush under running water and do not replace it until it is dried completely.Main brush cover Unlocking button for the dustbinMain brushAfter startup, the robot vacuum cleaner will plan the cleaning route in a zigzag pattern, then cleans along room’s edge. When the cleaning is complete, it will automatically return to the charging base to charge.4) Spot cleaningUse the remote control to operate the robot vacuum cleaner or directly place it in the lower-left corner of the area to be cleaned, and tap the Spot button in the App or press the Spot cleaning ( ) button on the remote control, then it will start a zigzag cleaning for the area from the current position and return to the charging base after cleaning.5)Spiral cleaningUse the remote control to operate the robot vacuum cleaner or place it in cleaning-centered area, tap Spiral button in the app or press the Spiral cleaning ( ) button on the remote control, then it will perform the cleaning from the current position and return to the charging base after cleaning.6) Edge cleaningTap the Edge button in the app or press the Edge cleaning ( ) button on the remote control, the robot vacuum cleaner will find the wall and clean along the wall automatically. When the cleaning is complete, it will return to the charging base to charge.7) Scheduled cleaningTap the Settings button in the app, set a cleaning time, then the robot vacuum cleaner will start to clean at the specified time. When the cleaning is complete, it will go back to the charging base to charge.8) Reset Wi-FiWhen you need to connect the robot vacuum cleaner with other mobile phone, or when the mobile phone fails to connect to it, please press and hold the Clean ( ) button on it for 8 seconds or press and hold the Wi-Fi( )button on the remote control for 3 seconds until you hear the voice prompt, then the Clean ( ) button indicator will quickly blink blue, indicating that the Wi-Fi has successfully been reset.9）Suction modeTap the suction button in the app, you can select Quiet, Standard, Powerful, and Max suction modes in the app.4.3 Cleaning the dustbin and filterHold the dustbin in a horizontal position and press the unlocking button to open the dustbin cover ‒ emptying the dustbin, removing the filter, and rinsing the dustbin, filter, and sponge ‒ and then once again assemble the dustbin, filter, and sponge into the robot vacuum cleaner before drying it out.Notes:• Switch off the robot vacuum cleaner and disconnect the charging base’s plug before cleaning and maintaining it.• Check there are no foreign matters that were vacuumed before cleaning.• The filter lasts for 6 months; Please clean the filter once or twice a month. • Make sure the dustbin, the filter and the sponge are completely dry before replacing them.• Do not expose the filter to direct sunlight for a long period.-6-
Loading ...
Loading ...
Loading ...