Tripp Lite B127U-111-PHPH Owner's Manual

Loading ...

Installation

6. Connect the pigtail USB-A connector on the remote receiver

unit to a USB power adapter (5V/1A) or a USB 3.0 port

on the display. The LEDs next to the RJ45 connectors will

illuminate orange to indicate the ports are receiving power.

Optional: The transmitter and receiver units can be charged

via the Micro-USB ports on each unit by connecting a Micro-

USB to USB-A cable between each unit and a USB power

adapter.

7. Turn on the power to your connected TVs/monitors.

8. Turn on the power to the HDMI source. The LEDs on both

the transmitter and receiver units should begin to ash to

indicate video is being transmitted and the video should

now display on the connected monitor(s).

Note: If a daisy-chain installation is desired, repeat steps 4-7 with

up to 3 additional B127U-110-PH or B127U-110-PD units (sold

separately).

Loading ...

Tripp Lite B127U-111-PHPH 1-Port HDMI over Cat6 Extender Kit, Pigtail Transmitter/Receiver, 4K 60 Hz, HDR, 444, 230 ft. 70.1 m, TAA