Loading ...
Loading ...
Loading ...
11
Installation
When you receive the Device, unpack the box to check the Device appearance and structures, and
then install the SIM card, SD card, and HDD.
Before the installation is complete, make sure the Device is disconnected from power, and do
not plug or unplug components when the power is connected.
When installing and taking out HDD, the Device electronic lock must be in "unlocked" status.
After the installation is complete, the Device electronic lock must be in "locked" status before
powering on the Device.
2.3.1 Installing HDD
2.3.1.1 MNVR4104-I series
MNVR4104-I series devices only support single HDD.
Gently press the left front cover.
The left front cover automatically opens.
Use a particular key to unlock the door.
Open door lock switch (single HDD).
Loosen the two screws at the front panel and take out the HDD carrier along the guide rail.
Take out the HDD carrier (single HDD).
Loosen two screws on the back panel of the HDD carrier, take out the rear carrier panel, and
remove the HDD carrier enclosure.
Loading ...
Loading ...
Loading ...