Loading ...
Loading ...
Loading ...
WWW.SENIXTOOLS.COM 9
ASSEMBLY
Attach Rear Trailing Shield
IMPORTANT: IMPORTANT: Do not operate unless an rear trailing shield is
assembled in place.
Pass the rear trailing shield through two shield holders on the mower. Ensure the
rear trailing shield is hanging down (Figure 5).
Position Starter Rope and Cable
1. Hold the blade control against the upper handle (Figure 6).
2. Slowly pull starter rope handle from engine and slip starter rope into the rope
guide (Figure 6).
3. Use the cable clamp to secure the control cable to the handle (Figure 6).
IMPORTANT: To reduce wear and allow for proper operation, make sure to leave
some slack in the upper portion of the cable.
Position Side Discharge Cover
The side discharge cover has already been mounted. Turn the side discharge cover
down before working and turn it upside when it is idle for easy storage (Figure 7).
Figure 5
Figure 6
Figure 7
Loading ...
Loading ...
Loading ...