XO XOV36SC Wall Mount Professional Chimney Range Hood

User instructions - Page 16

For XOV36SC. Also, The document are for others XO models: XOV30S*, XOV36S*, XOV42S*

PDF File Manual, 27 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
- 16 -





 
 
 
Fig.4: Take the air diverter A and drill two holes as
shown in the gure (hole diameter: 1/4" inches).
Once the two holes have been drilled, fasten the
air diverter A to the bracket H.
Fig.3: Put together the two parts of
the air deviator as shown in picture
no 3.1. It may be necessary to cut
the deviator to fit the width of the
chimney as shown in picture 3.2 A
sharp blade or Hacksaw is recom-
mended to trim the plastic.
Fig.1: Remove the 2 screws E and have the top ue F go
into the bottom ue G. Remove the two ues F/G and
place them on a at surface.
Fig.2: Make a mark on the
wall and then drill a hole
1/4" inches away from
the middle of the brack-
et. Insert the expansion
plug.
Loading ...
Loading ...
Loading ...