Loading ...
Loading ...
Loading ...
ASSEMBLY
HOW TO SET UP YOUR TRACTOR INSTALL SEAT (See Fig. 3)
CONNECT BATTERY (See Fig. 2)
CAUTION: Do not short battery termi-
nals by allowing a wrench or any other
object to contact both terminals at the
sametime. Before connecting battery,
remove metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Lift hood to raised position,
• Open terminal access doors, remove terminal protec-
tive caps and discard.
• If this battery is put into service after month and year
indicated on label (label tocated between terminals)
charge battery for minimum of one hour at 6-t0 amps,
• First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer', lock washer and hex
nut as shown,, Tighten securely.
• Connect BLACK grounding cable to negative (-) bat-
tery terminal with remaining hex bolt, flat washer, lock
washer and hex nut. Tighten securely.
• Close terminal access doors.
Use terminal access doors for:
• Inspection for secure connections (to tighten hard-
ware),,
• Inspectionfor corrosion.
• Testing battery,,
• Jumping (if required),,
• Periodic charging°
HEX NUT
DISCARD TERMINAL \\
PROTECTIVE CAPS
LOCK FLAT
WASHER WASHER
ACCESS
DOOR
CABLE
NEGA_VE
(BLAC_
CABLE
Adjust seat before tightening adjustment bolt.
• Remove cardboard packing on seat pan=
• Place seat on seat pan and assemble shoulder bolt.
• Assemble adjustment bolt, lock washer and flat washer
loosely. Do not tighten.
° Tighten shoulder bolt securely,,
• Lower seat into operating position and sit on seat°
• Slide seat until a comfortable position is reached which
allows you to press clutchforake pedal all the way
down,
° Get off seat without moving its adjusted position,
° Raise seat and tighten adjustment bolt securely,
SEAT ,=AN ,__ -_"__,_,-"_ [_ (
•
FIG. 3
CHECK TIRE PRESSURE
The tires on your tractorwere overinflated at the factory for
shipping purposes,, Correct tire pressure is important for
best cutting performance.
° Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS" on page 3 of this manual.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted. See 'q'O ADJUST
BRAKE" in the Service and Adjustments section of this
manual
FIG. 2
8
Loading ...
Loading ...
Loading ...