Loading ...
Loading ...
Loading ...
CONCERN SOLUTION
Cracking or
discolouration
of pump parts
•Avoidcontactwithantibacterialorabrasive
detergents/cleaners as they can damage the plastic.
Combinations of detergents, cleaning products,
sterilising solution, softened water and temperature
fluctuations may, under certain circumstances,
cause the plastic to crack. If this occurs, do not use.
The pump bodies and breast milk containers are
dishwasher safe but food colourings may discolour
them. Follow guidelines in ‘How to clean and sterilise
your Twin Electronic Breast Pump’ of the instruction
booklet.
Lost or broken parts •ContactPhilipsAVENTCustomerServicesfor
replacements (see back cover for contact details).
Pump not
responding
•Ensurethepumpiscorrectlyassembledand
switched on with the power indicator
illuminated GREEN.
•Makesurethecablesbetweentheelectricalwall
socket and the pump are correctly connected.
Pump light
flashing RED
If the pump stops working and the power light
is flashing RED then a fault has been detected.
•3flashes,delay,3flashes,etc–thepumphas
detected a vacuum fault. Switch off the pump
motor and check tubing and connections for
obstructions or damage.
•2flashes,delay,2flashes,etc–thepumphas
detected that it has overheated. Switch off the
pump motor. Ensure unit is not exposed to heat
sources or sitting in direct sunlight. Allow unit to
stabilise before trying again.
•Continuousflashing–thepumphasdetectedthat
the control cable has been incorrectly fitted/not
fitted or the cable is damaged.
19
Loading ...
Loading ...
Loading ...