Loading ...
Loading ...
Loading ...
Important!
●
The watch cannot connect with a
phone while a stopwatch time
measurement or timer countdown
operation is in progress.
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone’s home
screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (C) button
for about 2 seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: “Watch
settings”
n
“Connection time”. Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30
30
After disconnectionConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
2.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them, use
the procedure below to delete pairing
information from the watch and then
perform the pairing operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (D) for about 5
seconds.
This causes the second hand to
perform one revolution and deletes the
pairing information.
C
X
Push the crown back in.
Operation Guide 5513
10
Loading ...
Loading ...
Loading ...