Loading ...
Loading ...
Loading ...
CLEANING TiPS (continued)
PART
Oven door
Oven door gasket
CLEANING MATERIALS REMARKS
inside of door:
Detergent and water. Do Not Use
oven cleaners, cleaning powders
or harsh abrasives.
Clean only the door liner outside the
gasket. The door isautomatic ally cleaned
if the oven Is in the self-cleaning cycle.
DO NOT rub or damage the gasket. Avoid
getting soap and water on the gasket or
in any openings on the door. Rinse well.
NOTE: Soap left on liner causes additional stains when oven is reheated.
Outside of door:
Use soap and water to thoroughly clean the top, sides and front of the oven door.
Door should be completely open when cleaning top edge. Do not let water run down
through openings.
DO NOT CLEAN
Do not clean the door gasket. The
fiberglass material of the gasket has an
extremely low resistance to abrasion, An
intact and well-fitting oven door gasket is
essential for energy efficient oven
operation and good baking results, If you
notice the gasket becoming worn, frayed
or damaged inany way, or Ifit has become
displaced on the door, you should have it
replaced.
REMOVABLE OVEN DOOR
To r4_move:
1, Open the door to the stop position (see illus-
tration).
2. Grasp the door at each side and lift up and off
the hinges,
NOTE: Do not lift the oven door by the handle.
Glass breakage or damage to the door
may result.
NOTE: When the door is removed and
hinge arms are at stop position, do
not bump or try to move the hinge
arms, The hinges could snap back
causing an injury to the hands or
damage to the porcelain on the front
of the range, Cover the hinges with
toweling or insert empty towel rolls
behind the hinges while working in
the oven area,
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The hinge arms must still he in the stop
position.
2. Slide the door down onto the hinges as far as it will
go and close the door°
Fig, 3A
STOP POSITION
HINGE
Fig 3B
13 NECCH25-2
Loading ...
Loading ...
Loading ...