Loading ...
Loading ...
Loading ...
WATERFILTER
When the Filter Reset icon is displayed on Home screen,
you have to change the water filter. Tap the [_] icon to
access Filter Reset screen and reset filter timing.
Before removing or installing water filter:
IMPORTANT: Turn off household water supply.
Removing the water filter.
Rotate the knob of the cartridge counter clockwise. When
the cartridge is removed, you will feel it click out of place.
Pull out the cartridge.
Grasping filter by its handle, twist it about _¼turn until it
clicks into place. The filter is not correctly installed if you
can wiggle it from side to side. You will hear a snap when
it locks securely into place.
NOTE: Removing the filter causes a small amount of
water to flow out. Place a cup below filter
receptacle to catch water. Holding cartridge with
handle down will minimize spillage.
After installing water filter:
1. Turn on household water supply.
2. Dispense 2.5 gallons (9.46 liters) of water to purge the
system, depressing and releasing the dispenser pad in
cycles of 30 seconds ON and 60 seconds OFF. Open
the refrigerator door and shelf area to check for water
leaks.
To purchase replacement water filter, call
1-800-4-MY-HOME ®.
Installing the water filter.
Take the new cartridge out of its package and remove
protective cover from the o-rings. With cartridge knob in
the vertical position, push the new filter cartridge into the
cover until it stops.
28
Loading ...
Loading ...
Loading ...