Contents
Precautions
Operating Precautions
User Maintenance
Battery
Mobile Link Precautions
Before Getting Started...
General Guide
Watch Face Items
Navigating Between Modes
Mode Overview
Using the Crown
Hand and Day Indicator Movement
Charging
Viewing the Face in the Dark
Useful Features
Linking with a Phone
Getting Ready
Auto Time Adjustment
Configuring World Time Settings
Setting the Alarm
Configuring Timer Settings
Adjusting Hand and Day Indicator Alignment
Phone Finder
Configuring Watch Settings
Changing the Home City Summer Time Setting
Connection
Connecting with a Phone
Disconnecting from Your Phone
Using the Watch in a Medical Facility or
Aircraft
Unpairing
If you purchase another phone
Time Adjustment
Time Adjustment Using a Time Signal
Overview
Appropriate Signal Reception Location
Time Calibration Signal Reception
Ranges
Auto Time Calibration Signal Receive
Manual Time Calibration Signal Receive
Signal Reception Precautions
Using Watch Operations to Adjust the Time
Setting
Checking the Last Time Adjustment Result
Using the Watch in a Medical Facility or
Aircraft
Dual Time
Using CASIO WATCHES to Configure World
Time City Settings
Selecting a Time Zone
Configuring the Summer Time Setting (Dual
Time)
Swapping the Home City Time and Dual Time
Alarm
Using CASIO WATCHES to Configure Alarm
Settings
Configuring Alarm Settings
Turning Off an Alarm
Moving to Another Time Zone
Stopwatch
Measuring Elapsed Time
Measuring a Split Time
Timer
Using CASIO WATCHES to Configure Timer
Settings
Setting the Countdown Start Time
Using the Timer
Adjusting Hand and Day
Indicator Alignment
Using CASIO WATCHES to Adjust Hand and
Day Indicator Alignment
Adjusting Hand and Day Indicator Alignment
Other Settings
Resetting Watch Settings
Other Information
City (Time Zone) Table
Supported Phones
Specifications
Copyrights and Registered Copyrights
Troubleshooting
Watch Operation Guide 5672
1
MA2204-EA
OPUM-G
© 2022 CASIO COMPUTER CO., LTD.
Precautions
Operating Precautions
●
Water Resistance
●
The information below applies to watches
with WATER RESIST or WATER
RESISTANT marked on the back cover.
Water Resistance Under Daily Use
Marking on watch front or on
back cover
No BAR
mark
Example of Daily Use
Hand washing, rain Yes
Water-related work, swimming No
Windsurfing No
Skin diving No
Enhanced Water Resistance Under Daily
Use
5 Atmospheres
Marking on watch front or on
back cover
5BAR
Example of Daily Use
Hand washing, rain Yes
Water-related work, swimming Yes
Windsurfing No
Skin diving No
10 Atmospheres
Marking on watch front or on
back cover
10BAR
Example of Daily Use
Hand washing, rain Yes
Water-related work, swimming Yes
Windsurfing Yes
Skin diving Yes
20 Atmospheres
Marking on watch front or on
back cover
20BAR
Example of Daily Use
Hand washing, rain Yes
Water-related work, swimming Yes
Windsurfing Yes
Skin diving Yes
●
Do not use your watch for scuba diving or
other types of diving that requires air tanks.
●
Watches that do not have WATER RESIST
or WATER RESISTANT marked on the
back cover are not protected against the
effects of sweat. Avoid using such a watch
under conditions where it will be exposed to
large amounts of sweat or moisture, or to
direct splashing with water.
●
Even if a watch is water resistant, note the
usage precautions described below. Such
types of use reduce water resistance
performance and can cause fogging of the
glass.
ー
Do not operate the crown or buttons while
your watch is submersed in water or wet.
ー
Avoid wearing your watch while in the
bath.
ー
Do not wear your watch while in a heated
swimming pool, sauna, or any other high
temperature/high humidity environment.
ー
Do not wear your watch while washing
your hands or face, while doing
housework, or while performing any other
task that involves soaps or detergents.
●
After submersion in seawater, use plain
water to rinse all salt and dirt from your
watch.
●
To maintain water resistance, have the
gaskets of your watch replaced periodically
(about once every two or three years).
●
A trained technician will inspect your watch
for proper water resistance whenever you
have its battery replaced. Battery
replacement requires the use of special
tools. Always request battery replacement
from your original retailer or from an
authorized CASIO service center.
●
Some water-resistant watches come with
fashionable leather bands. Avoid
swimming, washing, or any other activity
that causes direct exposure of a leather
band to water.
●
The inside surface of the watch glass may
fog when the watch is exposed to a sudden
drop in temperature. No problem is
indicated if the fogging clears up relatively
quickly. Sudden and extreme temperature
changes (such as coming into an air
conditioned room in the summer and
standing close to an air conditioner outlet,
or leaving a heated room in the winter and
allowing your watch to come into contact
with snow) can cause it to take longer for
glass fogging to clear up. If glass fogging
does not clear up or if you notice moisture
inside of the glass, immediately stop using
your watch and take it to your original
retailer or to an authorized CASIO service
center.
●
Your water-resistant watch has been tested
in accordance with International
Organization for Standardization
regulations.
●
Band
●
Tightening the band too tightly can cause
you to sweat and make it difficult for air to
pass under the band, which can lead to skin
irritation. Do not fasten the band too tightly.
There should be enough room between the
band and your wrist so you can insert your
finger.
●
Deterioration, rust, and other conditions can
cause the band to break or come off of your
watch, which in turn can cause band pins to
fly out of position or to fall out. This creates
the risk of your watch falling from your wrist
and becoming lost, and also creates the risk
of personal injury. Always take good care of
your band and keep it clean.
●
Immediately stop using a band if you even
notice any of the following: loss of band
flexibility, band cracks, band discoloration,
band looseness, band connecting pin flying
or falling out, or any other abnormality. Take
your watch to your original retailer or to a
CASIO service center for inspection and
repair (for which you will be charged) or to
have the band replaced (for which you will
be charged).
Watch Operation Guide 5672
2
●
Temperature
●
Never leave your watch on the dashboard
of a car, near a heater, or in any other
location that is subject to very high
temperatures. Do not leave your watch
where it will be exposed to very low
temperatures. Temperature extremes can
cause your watch to lose or gain time, to
stop, or otherwise malfunction.
●
Impact
●
Your watch is designed to withstand impact
incurred during normal daily use and during
light activity such as playing catch, tennis,
etc. Dropping your watch or otherwise
subjecting it to strong impact, however, can
lead to malfunction. Note that watches with
shock-resistant designs (G-SHOCK,
BABY-G, G-MS) can be worn while
operating a chain saw or engaging in other
activities that generate strong vibration, or
while engaging in strenuous sports
activities (motocross, etc.)
●
Magnetism
●
The hands of analog and combination
(analog-digital) watches are moved by a
motor that uses magnetic force. When such
a watch is close to a device (audio
speakers, magnetic necklace, cell phone,
etc.) that emits strong magnetism, the
magnetism can cause timekeeping to slow
down, speed up, or stop, resulting in the
incorrect time being displayed.
●
Very strong magnetism (from medical
equipment, etc.) should be avoided
because it can cause malfunction of your
watch and damage to electronic
components.
●
Electrostatic Charge
●
Exposure to very strong electrostatic
charge can cause your watch to display the
wrong time. Very strong electrostatic
charge even can damage electronic
components.
●
Chemicals
●
Do not allow your watch to come into
contact with thinner, gasoline, solvents,
oils, or fats, or with any cleaners, adhesives,
paints, medicines, or cosmetics that contain
such ingredients. Doing so can cause
discoloration of or damage to the resin
case, resin band, leather, and other parts.
●
Storage
●
If you do not plan to use your watch for a
long time, thoroughly wipe it free of all dirt,
sweat, and moisture, and store it in a cool,
dry place.
●
Resin Components
●
Allowing your watch to remain in contact
with other items or storing it together with
other items for long periods while it is wet
can cause color on resin components to
transfer to the other items, or the color of the
other items to transfer to the resin
components of your watch. Be sure to dry
off your watch thoroughly before storing it
and make sure it is not in contact with other
items.
●
Leaving your watch where it is exposed to
direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from your
watch for long periods can cause it to
become discolored.
●
Friction caused by certain conditions
(strong external force, sustained rubbing,
impact, etc.) can cause discoloration of
painted components.
●
If there are printed figures on the band,
strong rubbing of the printed area can cause
discoloration.
●
Leaving your watch wet for long periods can
cause fluorescent color to fade. Wipe the
watch dry as soon as possible after it
becomes wet.
●
Semi-transparent resin parts can become
discolored due to sweat and dirt, and if
exposed to high temperatures and humidity
for long periods.
●
Daily use and long-term storage of your
watch can lead to deterioration, breaking, or
bending of resin components. The extent of
such damage depends on usage conditions
and storage conditions.
●
Leather Band
●
Allowing your watch to remain in contact
with other items or storing it together with
other items for long periods while it is wet
can cause the color of the leather band to
transfer to the other items or the color of the
other items to transfer to the leather band.
Be sure to dry off your watch thoroughly with
a soft cloth before storing it and make sure
it is not in contact with other items.
●
Leaving a leather band where it is exposed
to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from a leather
band for long periods can cause it to
become discolored.
CAUTION:
Exposing a leather band to rubbing or dirt
can cause color transfer and discoloration.
●
Metal Components
●
Failure to clean dirt from metal components
can lead to formation of rust, even if
components are stainless steel or plated. If
metal components exposed to sweat or
water, wipe thoroughly with a soft,
absorbent cloth and then place the watch in
a well-ventilated location to dry.
●
Use a soft toothbrush or similar tool to scrub
the metal with a weak solution of water and
a mild neutral detergent, or with soapy
water. Next, rinse with water to remove all
remaining detergent and then wipe dry with
a soft absorbent cloth. When washing metal
components, wrap the watch case with
kitchen plastic wrap so it does not come into
contact with the detergent or soap.
●
Bacteria and Odor Resistant Band
●
The bacteria and odor resistant band
protects against odor generated by the
formation of bacteria from sweat, which
ensures comfort and hygiene. In order to
ensure maximum bacteria and odor
resistance, keep the band clean. Use an
absorbent soft cloth to thoroughly wipe the
band clean of dirt, sweat, and moisture. A
bacteria and odor resistant band
suppresses the formation of organisms and
bacteria. It does not protect against rash
due to allergic reaction, etc.
Note that CASIO Computer Co., Ltd.
assumes no responsibility for any
damage or loss suffered by you or any
third party arising through the use of your
watch or its malfunction.
Watch Operation Guide 5672
3
User Maintenance
●
Caring for Your Watch
Remember that you wear your watch next to
your skin, just like a piece of clothing. To
ensure your watch performs at the level for
which it is designed, keep it clean by
frequently wiping with a soft cloth to keep your
watch and band free of dirt, sweat, water and
other foreign matter.
●
Whenever your watch is exposed to sea
water or mud, rinse it off with clean fresh
water.
●
For a metal band or a resin band with metal
parts, use a soft toothbrush or similar tool to
scrub the band with a weak solution of water
and a mild neutral detergent, or with soapy
water. Next, rinse with water to remove all
remaining detergent and then wipe dry with
a soft absorbent cloth. When washing the
band, wrap the watch case with kitchen
plastic wrap so it does not come into contact
with the detergent or soap.
●
For a resin band, wash with water and then
wipe dry with a soft cloth. Note that
sometimes a smudge like pattern may
appear on the surface of a resin band. This
will not have any effect on your skin or
clothing. Wipe with a cloth to remove the
smudge pattern.
●
Clean water and sweat from a leather band
by wiping with a soft cloth.
●
Not operating a watch crown, buttons, or
rotary bezel could lead to later problems
with their operation. Periodically rotate the
crown and rotary bezel, and press buttons
to maintain proper operation.
●
Dangers of Poor Watch Care
Rust
●
Though the metal steel used for your watch
is highly rust-resistant, rust can form if your
watch is not cleaned after it becomes dirty.
ー
Dirt on your watch can make it impossible
for oxygen to come into contact with the
metal, which can lead to breakdown of
the oxidization layer on the metal surface
and the formation of rust.
●
Rust can cause sharp areas on metal
components and can cause band pins to fly
out of position or to fall out. If you ever notice
any abnormality immediately stop using
your watch and take it to your original
retailer or to an authorized CASIO service
center.
●
Even if the surface of the metal appears
clean, sweat and rust in crevasses can soil
the sleeves of clothing, cause skin irritation,
and even interfere with watch performance.
Premature Wear
●
Leaving sweat or water on a resin band or
bezel, or storing your watch an area subject
to high moisture can lead to premature
wear, cuts, and breaks.
Skin Irritation
●
Individuals with sensitive skin or in poor
physical condition may experience skin
irritation when wearing a watch. Such
individuals should keep their leather band
or resin band particularly clean. Should you
ever experience a rash or other skin
irritation, immediately remove your watch
and contact a skin care professional.
Battery
●
The special rechargeable battery used by
your watch is not intended to be removed or
replaced by you. Use of a rechargeable
battery other than the special one specified
for your watch can damage your watch.
●
The rechargeable (secondary) battery is
charged when the solar panel is exposed to
light, so it does not require regular
replacement as the primary battery
requires. Note, however, that long use or
operating conditions can cause the
capacity or charging efficiency of the
rechargeable battery to deteriorate. If you
feel that the amount of operation provided
by charging is too short, contact your
original retailer or CASIO service center.
Watch Operation Guide 5672
4
Mobile Link Precautions
●
Legal Precautions
●
This watch complies with or has received
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal offense. For details, visit the CASIO
Website.
https://world.casio.com/ce/BLE/
●
Use of this watch inside of aircraft is
restricted under the aviation laws of each
country. Be sure to follow the instructions of
airline personnel.
●
Precautions when using Mobile Link
●
When using this watch in combination with
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure of a building, and other factors
may require a much closer range.
●
This watch can be affected by other devices
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can
be affected by operation of a microwave
oven. The watch may not be able to
communicate normally with a phone if a
microwave oven is operating nearby.
Conversely, this watch may cause noise in
radio reception and the video image of a TV.
●
Bluetooth of this watch uses the same
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference, slower communication
speeds and noise for the watch and the
wireless LAN device, or even
communication failure.
●
Stopping Radio Wave Emission by This
Watch
The watch is emitting radio waves whenever
the second hand is pointing to [C].
Even if the second hand is not pointing at [C],
the watch will automatically attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operation below to stop radio
wave generation.
●
Stopping Radio Wave Generation
Press any button to terminate the Bluetooth
connection.
30
30
Connected Disconnected
●
Disabling Auto Time Adjustment
Configure CASIO WATCHES settings to
disable time adjustment between the watch
and phone.
l
Using CASIO WATCHES to Disable
Auto Time Adjustment
Watch Operation Guide 5672
5
Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Watch Features
●
Phone Linking
The watch supports connection and
communication with a Bluetooth capable
phone.
●
Solar Charging
Sunlight and artificial light generate
electricity for watch operation as it charges.
●
Time Signal Reception
The watch receives a radio signal
containing time information and uses it to
keep its time setting accurate.
●
Dual Time
Dual Time lets you keep track of the current
time in another time zone in addition to your
current location’s time.
●
Alarm
A beeper sounds when the alarm time you
set is reached.
●
Stopwatch
You can use the stopwatch to measure up
to 24 hours of elapsed time in 1-second
units.
●
Timer
Countdown from a start time specified by
you. An alarm sounds when the countdown
reaches zero.
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
General Guide
30
④
①②③
⑨⑧⑥⑦⑤
⑩
A Hour hand
B Second hand
C Minute hand
D Mode hand
E Small Hour Hand (24-hour)
F Small hour hand
G Small minute hand
H 24-hour hand
I Day indicator
J Crown
A button
Pressing this button causes the mode hand to
indicate the current charge level.
B button
Press to turn on illumination.
C button
Each press cycles between watch modes.
In any mode, hold down this button for at least
one second to return to the Timekeeping
Mode.
D button
Pressing this button causes the second hand
to indicate the last receive operation result.
Watch Face Items
①
③
④
⑤
⑥
⑦
⑧
⑨
⑩
②
A Day of week
In the Timekeeping Mode, the mode hand
points to the day of the week in the Home
City.
B Battery level
Pressing (A) causes the mode hand to
indicate the current charge level.
C [ST]
In the Stopwatch Mode, the mode hand
points to [ST].
D [TR]
In the Timer Mode, the mode hand points
to [TR].
E [AL]
In the Alarm Mode, the mode hand points
to [AL].
F Summer time setting
The mode hand points to the current
summer time setting.
Watch Operation Guide 5672
6
G Last signal receive result/auto time
adjustment setting status
The second hand points to [Y(YES)] or
[N(NO)] to indicate the result of the last
auto time adjustment operation based on
time signal reception or connection with a
phone.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
The second hand points to [Y(YES)] or
[N(NO)] to indicate if auto time adjustment
is enabled or disabled.
[Y(YES)]: Auto time adjustment enabled
[N(NO)]: Auto time adjustment disabled
H Alarm on/off setting
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
I [RC]
The second hand points to this mark while
calibration signal reception is in progress.
J [C]
The second hand points to this mark while
there is a connection between the watch
and a phone.
Navigating Between Modes
Each press of (C) cycles between watch
modes.
●
In any mode, hold down (C) for at least one
second to return to the Timekeeping Mode.
C
C
C
C
30
Alarm Mode
Timekeeping Mode
Stopwatch Mode
Timer Mode
Mode hand
●
Connecting with a Paired Phone
Hold down (C) for at least 2.5 seconds until the
second hand points to [C].
●
To disconnect, press any button.
30
30
C
Before connection After connection
Any button
l
C
Pair the watch with a phone.
Mode Overview
●
Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
30
③⑤⑥④
②①
Last Time
Adjustment Result
A Day of the week at current location
B Current location time (24-hour time)
One revolution every 24 hours.
C Dual Time hour (24-hour hand)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
D Dual Time hour
E Dual Time minute
F Current location date
Time Adjustment Using a Time Calibration
Signal
Hold down (D) for at least 0.5 seconds until the
second hand points to [RC].
●
A manual time calibration signal receive
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
Dual Time
Hold down (B) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (D) for at least 5 seconds until the
second hand points to [C] twice.
Watch Operation Guide 5672
7
●
Stopwatch Mode
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
●
The main hour and minute hands indicate
the current time.
30
②④③
①
Reset
Start/Stop
A Stopwatch seconds
B Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
C Stopwatch hours
D Stopwatch minutes
●
Timer Mode
The second hand, and the small hour and
minute hands indicate the current countdown
time.
●
The main hour and minute hands indicate
the current time.
30
②④③
①
Reset
Start/Stop
A Timer seconds
B Timer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
C Timer hours
D Timer minutes
●
Alarm Mode
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
●
The main hour and minute hands indicate
the current time.
30
②④③
①
Enabling/
Disabling the
Alarm
A Alarm enabled/disabled
B Alarm hour (24-hour time)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
C Alarm hour
D Alarm minute
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Loosen
Crown
Important!
●
To prevent loss of water resistance
and/or damage due to impact, be sure
to screw the crown in by rotating it
away from you as you push it in.
Screw in
●
When pushing the crown back in, take
care not to apply too much force.
●
Fast Forward/Fast Reverse
Second click
First click
Normal timekeeping
Crown
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
●
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Watch Operation Guide 5672
8
Hand and Day Indicator
Movement
30
Day indicator
Mode hand
●
Mode Hand and Day Indicator
Movement
Changing the day setting of the watch will also
cause the mode hand to move.
●
Day
●
It can take anywhere from about one to four
minutes for the day indicator to change after
timekeeping reaches midnight. The mode
hand moves as the day indicator changes.
●
The day may not be indicated correctly
while the watch’s crown is pulled out.
Charging
This watch runs on power supplied from a
rechargeable (secondary) battery that is
charged by a solar panel. The solar panel is
integrated into the face of the watch, and
power is generated whenever the face is
exposed to light.
●
Charging the Watch
When you are not wearing the watch, put it in
a location where it is exposed to bright light.
While you are wearing the watch, make sure
that its face (solar panel) is not blocked from
light by the sleeve of your clothing. Power
generation efficiency is reduced even when
the face of the watch is blocked only partially.
NOYES
Important!
●
Some light sources and environments
can cause the watch to become
extremely hot during charging, which
creates the risk of burn injury and
damage to internal watch
components.
Avoid charging the watch under
conditions like the ones described
below, where the temperatures may
exceed 60 °C (140 °F).
ー
On the dashboard of a vehicle
parked in the sun
ー
Near incandescent lamps, camera
lights, halogen lamps, or other
sources of heat
ー
In locations exposed to direct
sunlight for long periods and other
hot locations
●
Checking the Charge Level
Pressing (A) causes the mode hand to
indicate the current charge level. To return the
mode hand to its original position (current day
of the week in the Timekeeping Mode), press
(A) again or simply wait for a while.
3
0
①
②
③
A Low Battery
B Good (medium charge)
C Good (high charge)
●
Remaining Charge and Dead Battery
You can determine if the charge level is low by
checking the hand movement. Functions
become disabled as battery power goes low.
Important!
●
Should the battery go low or go dead,
expose the face (solar panel) to light as
soon as possible.
Note
●
Exposing the watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.
Low Battery Power
The second hand jumps at two-second
intervals.
30
Second hand
Watch Operation Guide 5672
9
Dead Battery
All hands and the day indicator are stopped.
1
●
Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Charging Times Required for 1 Day of
Operation
Light Level (Lux)
Approximate
Charging Time
50,000 8 minutes
10,000 30 minutes
5,000 48 minutes
500 8 hours
Times Required to Achieve Next Charge
Level
●
Sunny day, outdoors (50,000 lux)
Dead battery
n
Medium
charge
2 hours
Medium charge
n
High
charge
16 hours
High charge
n
Full charge
5 hours
●
Sunny day, near a window (10,000 lux)
Dead battery
n
Medium
charge
5 hours
Medium charge
n
High
charge
61 hours
High charge
n
Full charge
17 hours
●
Overcast day, near a window (5,000 lux)
Dead battery
n
Medium
charge
8 hours
Medium charge
n
High
charge
99 hours
High charge
n
Full charge
27 hours
●
Indoor fluorescent lighting (500 lux)
Dead battery
n
Medium
charge
89 hours
Medium charge
n
High
charge
-
High charge
n
Full charge
-
Note
●
Actual charging time depends on the
local charging environment.
●
Power Saving
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and
5:50 a.m. will cause the second hand to stop,
and the watch to enter Level 1 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 2 power saving.
Level 1 :
Basic timekeeping functions are operational.
Level 2 :
Only the day indicator is operational.
Note
●
Note that the watch also may enter the
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.
●
The watch will enter power saving
when it is in one of the modes below.
ー
Timekeeping Mode
ー
Stopwatch Mode (reset to all zeros)
ー
Timer Mode (timer start time
displayed)
●
Recovering from Power Saving
Operation
Press any button, perform a crown operation,
or place the watch in a well-lit area to recover
from power saving.
Viewing the Face in the Dark
The watch has an LED light that you can turn
on for reading in the dark.
You can turn on the light in the Timekeeping
Mode or Alarm Mode.
●
Turning On Illumination
Press (B) to illuminate the face and digital
display.
3
0
●
Illumination will turn off automatically if an
alarm starts to sound.
●
Illumination is disabled while the hands are
moving at high speed.
●
The light may flicker when it turns on or off.
Watch Operation Guide 5672
10
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time adjustment
l
Auto Time Adjustment
12:30
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
Getting Ready
●
Your phone needs to have the CASIO
“CASIO WATCHES” app installed to pair
with the watch.
Linking with a Phone
While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch’s current time setting is adjusted
automatically. You can also change the
watch’s other settings.
Note
●
This function is available only while
CASIO WATCHES is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO “CASIO WATCHES” app and install it
on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “CASIO WATCHES” icon.
●
Tap on the “My Watch” tab. Next,
select the applicable product name.
3.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
between the watch and phone, the
second hand moves to [C].
●
If pairing fails for some reason, the
watch will return to the state in step 1 of
this procedure. Perform the pairing
procedure again from the beginning.
Note
●
The first time you start up CASIO
WATCHES, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Watch Operation Guide 5672
11
Auto Time Adjustment
The watch will connect with a phone at preset
times each day and adjust its time settings.
●
Using This Function
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While CASIO WATCHES is not
running on the phone
Note
●
If the watch does not indicate the
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
l
Adjusting Hand and Day Indicator
Alignment
●
If there is a World Time City specified
with CASIO WATCHES, its time will
also be adjusted automatically.
●
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1. Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (D) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch’s time setting
will be adjusted.
●
The connection is terminated
automatically after time adjustment is
complete.
30
30
Connected After time adjustment
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCHES causes the watch’s World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
30
Note
●
CASIO WATCHES World Time lets you
select from among approximately 300
cities as the World Time City.
Watch Operation Guide 5672
12
●
Selecting a World Time City
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
You can determine whether a World
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour (24-hour)
World Time hour and minute
●
Configuring the Summer Time Setting
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel auto
standard time/summer time switching.
●
CASIO WATCHES screen shows
information about summer time
periods.
●
Swapping Your World Time and Home
Time
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
30
30
Home City (New York)
Home City (Tokyo)
After swappingBefore swapping
World Time City
(Tokyo)
World Time City
(New York)
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Watch Operation Guide 5672
13
Setting the Alarm
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
●
Change the alarm setting from off to on.
●
Set the hour and minute of the alarm
time.
Configuring Timer Settings
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
●
Set the hours and minutes of the timer
start time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCHES to
adjust them.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Phone finder will not sound the tone
unless CASIO WATCHES is running
on the phone.
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
Connected Disconnected
2.
X
Hold down (D) until the second hand
points to [C] twice.
A connection will be established between
the watch and phone, and then the
phone’s ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use CASIO WATCHES to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Watch Operation Guide 5672
14
Changing the Home City
Summer Time Setting
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
1. Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
Important!
●
If you have problems establishing a
connection, it could mean that the
CASIO WATCHES app is not running
on your phone. On your phone’s home
screen, tap the “CASIO WATCHES”
icon. After the app starts up, hold down
the watch’s (C) button for at least 2.5
seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: “Watch settings”
n
“Connection time with the app”.
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.
Disconnecting from Your Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30
30
Connected Disconnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
Unpairing the watch from a phone requires
both CASIO WATCHES and watch
operations.
●
Deleting Pairing Information from
CASIO WATCHES
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
Connected Disconnected
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Watch Operation Guide 5672
15
●
Deleting Pairing Information from the
Watch
1.
X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2.
X
Loosen the crown and then pull it out to
the second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Crown
Time zone
Summer time setting
3.
X
Hold down (D) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
3
0
4.
X
Push the crown back in and then lock it.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Time Adjustment
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
●
Disable auto time adjustment
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
l
Using the Watch in a Medical
Facility or Aircraft
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
l
Auto Time Adjustment
12:30
Can you receive a time signal in your area?
If you are able to receive a time signal,
time settings can be adjusted in
accordance with a received signal.
l
Time Calibration Signal Reception
Ranges
l
Selecting Your Home City’s Time Zone
Other than the above.
If you are unable to connect with a phone
and are unable to receive a time signal,
you can perform watch button operations
to adjust its time setting.
l
Using Watch Operations to Adjust the
Time Setting
Watch Operation Guide 5672
16
Time Adjustment Using a
Time Signal
Overview
The watch’s time and day settings can be
configured in accordance with a received time
calibration signal.
Important!
●
In order to make it possible for the
current time setting to be adjusted
correctly based on time calibration
signal reception, you need to specify
the time zone where you are using the
watch.
●
If the watch was unable to connect with
a phone even once for time adjustment
during the previous day while
connection with a phone is being used,
it will automatically try to receive a time
calibration signal.
●
Disable auto time adjustment
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
l
Using CASIO WATCHES to
Configure Settings
l
Using Watch Operations to
Configure Settings
Note
●
Areas where time calibration signal
reception is supported are limited.
When the watch is in an area where
time calibration signal reception is not
possible, connect with a phone to
adjust time and day settings.
l
Time Calibration Signal Reception
Ranges
●
If the watch does not indicate the
correct time even after it receives a
time calibration signal, correct the
hand and day indicator positions.
l
Using CASIO WATCHES to Adjust
Alignment
l
Using Watch Operations to
Configure Settings
Appropriate Signal Reception
Location
A time calibration signal can be received while
the watch is near a window.
●
Position the watch so its 12 o’clock side is
facing the window.
●
Keep metal objects away from the watch.
●
Do not move the watch.
●
Do not perform any operation on the watch.
12 o'clock
Note
●
You may experience time calibration
signal reception problems in the areas
described below.
ー
Among or near buildings
ー
While riding in a vehicle
ー
Near household appliances, office
machines, mobile phones, etc.
ー
On a construction site, in an airport,
or any other location where radio
wave interference occurs
ー
Near high-voltage lines
ー
In mountainous areas or behind a
mountain
Time Calibration Signal Reception
Ranges
●
Japan (JJY)
The Japan time signal radio stations are
located on Mt. Otakadoya in Fukushima and
Mt. Hagane in Fukuoka/Saga.
The reception range of the Japanese time
signals is approximately 1,000 km from each
transmission station.
●
China (BPC)
The China time signal radio station is located
in Shangqiu, Henan Province, China.
The reception range of the Chinese time
signal is approximately 1,500 km from the
transmission station.
●
United States (WWVB)
The United States time signal radio station is
located in Fort Collins, Colorado.
The reception range of the U.S. time signal is
approximately 3,000 km from the transmission
station.
●
U.K. (MSF)/Germany (DCF77)
The U.K. time signal radio station is located in
Anthorn, Cumbria.
The German time signal radio station is
located in Mainflingen, southeast of Frankfurt.
The reception range of the U.K. and German
time signals is approximately 1,500 km from
each transmission station.
Note
●
Even if you are within the normal
reception range of a time calibration
signal, reception may be made
impossible by the following factors:
geographic contours, weather, the
season, the time of day, wireless
noise.
Watch Operation Guide 5672
17
Auto Time Calibration Signal
Receive
An automatic time calibration signal receive
operation is performed and the time and day
settings are adjusted between midnight and
5:00 a.m. Once a signal receive operation is
successful, no more auto receive operations
are performed that day.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Place the watch near a window or some
other location appropriate for signal
reception.
●
The second hand points to [RC] while
the receive operation in progress.
●
When the receive operation is
successful, the time and day settings
will be adjusted automatically.
Note
●
Reception takes anywhere from about
two minutes to about 10 minutes. It can
take as long as 20 minutes.
●
If the watch connects with a phone and
adjusts its time setting, the watch will
not perform auto receive of a time
calibration signal for the rest of that day
or the next day.
Manual Time Calibration Signal
Receive
1. Place the watch near a window or some
other location appropriate for time signal
reception.
2. Enter the Timekeeping Mode.
l
Navigating Between Modes
3. Hold down (D) for at least 0.5 seconds
until the second hand points to [RC].
This indicates that the receive operation
has started. After the receive operation is
complete, the watch’s time and day
settings will be adjusted accordingly.
3
0
Note
●
The receive operation takes anywhere
from about two minutes to about 10
minutes. It can take as long as 20
minutes.
●
Time calibration signal reception is
better at night than during the day.
●
A time calibration signal cannot be
received while the watch is paired with
a phone.
Signal Reception Precautions
●
When the watch is unable to adjust its time
in accordance with a calibration signal for
some reason, average timekeeping
accuracy is within ±15 seconds per month.
●
Note that an internal decoding process the
watch performs after it receives a signal
may cause the time setting to be slightly off
(by less than one second).
●
Time calibration signal reception is not
possible under the conditions described
below.
ー
While battery power is low
ー
In any mode besides the Timekeeping
Mode
ー
At Power Saving Level 2
ー
While the crown is pulled out
ー
While the Home City setting is a time zone
where time signal reception is not
possible
ー
While the watch is outside the time signal
reception range
ー
While the watch is paired with a phone
●
To perform a manual time calibration signal
receive operation, make sure the watch is
not paired with a phone. If it is, delete the
watch’s pairing information before
performing the manual receive operation.
l
Unpairing
●
When the receive operation is successful,
the time and/or day settings will be adjusted
automatically. Summer time will not be
applied correctly in the case described
below.
ー
When the summer time start date and
time, end date and time, or other rules are
changed by authorities
●
If your watch is connected with a phone,
settings must be configured so CASIO
WATCHES can acquire location
information. Even if you are in an area that
is within the reception range of a time signal,
reception will not be performed if settings
are configured in a way that makes signal
reception impossible.
●
As of July 2021, China does not observe
summer time. If China starts to observe
summer time in the future, the time
displayed by the watch for China may not be
correct.
Watch Operation Guide 5672
18
Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
●
Selecting Your Home City’s Time Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
●
If you do not specify the time zone
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1. Loosen the crown and then pull it out to the
second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) Table
Tokyo (+9 offset)
30
Crown
Time zone (+9 position)
Summer time setting
2. Rotate the crown to change the time zone.
3. Push the crown back in and then lock it.
●
Adjusting the Time and Day Setting
1. Loosen the crown and then pull it out to the
second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Crown
Time zone
Summer time setting
2. Hold down (C) for at least one second.
This causes the second hand to move to
12 o’clock, and enables the hour and
minute setting operation.
3. Rotate the crown to change the hour and
minute settings.
4. Press (C).
This enables the year ten’s digit setting
operation.
5. Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
80 40
90
30
20
50
70
10
60
00
Year (10’s digit)
6. Press (C).
This enables the year one’s digit setting
operation.
7. Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
84
9
3
2
5
7
1
6
0
Year (one’s digit)
8. Press (C).
This enables the month setting operation.
9. Rotate the crown to change the month.
84
9
3
2
5
7
1
6
12
10
11
Month
10. Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
●
Changing the day setting will cause the
mode hand to rotate repeatedly.
l
Hand and Day Indicator Movement
11. Rotate the crown to change the day.
30
Day
●
To return to the hour and minute setting
operation, press (C).
12. On a time signal at the top of a minute,
push the crown back in and lock it.
●
Configuring the Summer Time Setting
(Home City)
The watch’s current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Watch Operation Guide 5672
19
Important!
●
If the Home City time zone is an area
where time calibration signal reception
is possible, you can select [AT] (Auto)
for the summer time setting. While [AT]
is specified as the summer time
setting, the first time calibration signal
receive operation after the Home City
enters the summer time period will
cause the watch’s time setting to
switch to summer time. The first time
calibration signal receive operation
after the end of the summer time period
is reached will cause the watch’s time
setting to switch to standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
l
City (Time Zone) Table
1. Loosen the crown and then pull it out to the
second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Crown
Time zone
Summer time setting
2. Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
3
0
3. Push the crown back in and then lock it.
Checking the Last Time
Adjustment Result
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (D).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
3
0
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (D).
The second hand will indicate the last
receive result for nine or ten seconds.
3
0
3. Within 10 seconds after you perform the
operation in step 2, loosen the crown and
then pull it out to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4. Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
Crown
5. Push the crown back in and then lock it.
Note
●
If the watch is paired with a phone,
CASIO WATCHES can be used to
disable auto time adjustment.
l
Using CASIO WATCHES to
Disable Auto Time Adjustment
Watch Operation Guide 5672
20
Dual Time
Dual Time lets you look up the current time in
various time zones around the globe.
30
Using CASIO WATCHES to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the World
Time city.
l
Configuring World Time Settings
Note
●
World Time cities that can be selected
only by using CASIO WATCHES
cannot be selected using watch
operations.
Selecting a Time Zone
Use the procedure below to specify the time
zone where the city whose time you want to
use for Dual Time is located.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting of the Dual Time.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) Table
New York (-5 offset)
30
Crown
Summer time setting
Time zone (55 position)
3. Rotate the crown to change the time zone.
The Dual Time hour and minute hands
indicate the current time in the selected
time zone.
30
Crown
Dual Time 24-hour
Dual Time hour and minute
4. Push the crown back in and then lock it.
Configuring the Summer
Time Setting (Dual Time)
The watch’s current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
●
If the Dual Time zone is one area where
time calibration signal reception is
possible, you can select [AT] (Auto) for
the summer time setting. While [AT] is
specified as the summer time setting,
the first time calibration signal receive
operation before or after the summer
time period is entered will cause the
Dual Time setting to switch
automatically between summer time
and standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
l
City (Time Zone) Table
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting of the Dual Time.
30
Crown
Summer time setting
Time zone
Watch Operation Guide 5672
21
3. Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
3
0
4. Push the crown back in and then lock it.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
Swapping the Home City
Time and Dual Time
In the Timekeeping Mode, you can swap your
Home City time with your Dual Time by holding
down (B) for at least three seconds.
30
30
Dual Time
Home Time
After swappingBefore swapping
Home TimeDual Time
●
If a swapping operation causes a change in
the day indicator setting, the mode hand will
rotate repeatedly.
l
Hand and Day Indicator Movement
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Alarm
The watch will beep when the alarm time is
reached.
●
The beeper is muted in the cases described
below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l
Power Saving
30
Using CASIO WATCHES to
Configure Alarm Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
This turns on the alarm.
3. Rotate the crown to change the alarm time
setting.
30
Crown
MinuteHour
Alarm on
4. Push the crown back in and then lock it.
Note
●
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
●
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
●
A beeper sounds for 10 seconds when
an alarm time is reached.
Watch Operation Guide 5672
22
Turning Off an Alarm
To stop the alarm from sounding, perform the
steps below to turn it off.
●
To have the alarm sound again, turn it on.
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to move the second hand to
OFF.
●
Each press of (D) toggles between ON
and OFF.
30
Alarm on
Alarm off
Moving to Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1. Configure the World Time to the current
time at your destination.
30
Destination time
Current time
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
2. Disable auto time adjustment.
30
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
●
After Arriving
1. Swap the origin time zone time with the
destination time zone time.
30
30
Destination time
After swappingBefore swapping
Destination time
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
2. Enable auto time adjustment.
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
3. Adjust the time setting.
l
Triggering Immediate Time Adjustment
Watch Operation Guide 5672
23
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
30
Measuring Elapsed Time
30
Seconds
Minutes
Hours (24-hour time)
Hours
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
3. Press (D) to reset the stopwatch to all
zeros.
●
Pulling out the crown while an elapsed
time measurement operation is in
progress will reset the displayed value
to all zeros.
Measuring a Split Time
30
Seconds
Minutes
Hours (24-hour time)
Hours
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Each press of (D) causes the elapsed
time up to that point (split time) to be
indicated for about five seconds.
B
D
B
Stop
Split
Start
3. Press (D) to reset the stopwatch to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted when battery power is
low.
30
Using CASIO WATCHES to
Configure Timer Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the timer
start time.
l
Configuring Watch Settings
Watch Operation Guide 5672
24
Setting the Countdown Start
Time
The countdown start time can be set in 1-
minute units up to 24 hours.
●
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
3. Rotate the crown to change the
countdown start time setting.
30
Crown
Seconds
Minutes
24-hour
Hours
4. Push the crown back in and then lock it.
Note
●
To specify a countdown start time of 24
hours, align the small hour and minute
hands with 12 o’clock, so the small 24-
hour hand aligns with 24.
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Press (B) to start the timer countdown.
3
0
A beeper sounds for 10 seconds when the
end of the countdown is reached.
●
To pause an ongoing countdown, press
(B). You can reset a paused countdown
to its start time by pressing (D).
3. Press any button to stop the tone.
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
●
The watch performs alignment of the hour
hand, minute hand, second hand, and 24-
hour hand automatically.
Using CASIO WATCHES to
Adjust Hand and Day
Indicator Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
and day indicator positions.
l
Adjusting Hand and Day Indicator
Alignment
Adjusting Hand and Day
Indicator Alignment
1. Loosen the crown and then pull it out to the
second click.
2. Hold down (D) for at least five seconds
until the second hand points to 12 o’clock .
Release the button when the second hand
reaches 12 o’clock.
This will start auto alignment of the hour
hand, minute hand, second hand, and 24-
hour hand.
●
After auto alignment is complete, the
hands should be in the positions shown
below.
30
Minute hand
Hour hand
Second hand
24-hour hand
Crown
3. Press (C).
Confirm that the 24-hour hand is at the 24
position (straight upwards).
Watch Operation Guide 5672
25
4. If the 24-hour hand is at the 12 position
(straight downwards), hold down (B) for at
least two seconds to move it to the 24
position (straight upwards).
5. Press (C).
Confirm that the small hour and minute
hands, and the small 24-hour hand are all
stopped at 12 o’clock.
30
Small minute hand
Small hour hand
Small 24-hour hand
6. If the small hour and minute hands, and
the small 24-hour hand are not at 12
o’clock, rotate the crown to align them with
12 o’clock.
7. Press (C).
Confirm that the mode hand is stopped at
12 o’clock, and check if the day is
indicated properly.
30
30
Day (Operation start day)
Mode hand
8. If the mode hand and/or the day indicator
is out of alignment, rotate the crown to
move the mode hand to 12 o’clock and the
day to the center of the indicator window.
●
The movement range of the mode hand
and day indicator is limited when you
rotate the crown. The maximum left-
right movement of the mode hand is 180
degrees in either direction. The day
indicator moves only slightly.
●
After the mode hand and day indicator
are in the positions you want, advance
to step 11 of this procedure. If you are
unable to make the adjustments you
want, go to step 9.
9.
Press (C).
Confirm that the day indicator shows “1”.
30
1
Day
●
The mode hand will rotate repeatedly
while the date setting is being adjusted.
In some cases, the mode hand may
continue to rotate for about 20 minutes.
l
Hand and Day Indicator Movement
10. If “1” is not shown for the day, rotate the
crown until “1” is shown for the day.
●
The mode hand moves in conjunction
with crown rotation. Move the mode
hand to 12 o’clock.
11. Push the crown back in and then lock it.
Note
●
Leaving the crown pulled out for more
than approximately 30 minutes without
performing any operation will
automatically cause the adjustment
operation to become disabled. If this
happens, push the crown back in to its
normal position and then pull it out
again to restart the procedure from the
beginning. Pushing the crown in to its
normal position part way through the
alignment procedure will cause the
hands to return to their normal position.
Any alignment you performed up to
that point will be applied.
Other Settings
This section explains other watch settings you
can configure.
Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
second click.
3. Hold down (C) for at least five seconds
until the second hand points to 12 o’clock
twice.
30
Crown
Second hand
4. Push the crown back in and then lock it.
Watch Operation Guide 5672
26
Other Information
This section provides non-operational
information you also need to know. Refer to
this information as required.
City (Time Zone) Table
Time
offset
Second
Hand
Position
Representative
City
Receivable
Transmitter
±0* 0 London, Dublin
MSF,
DCF77
+1* 1 Paris, Rome
+2* 2 Athens, Cairo
+3 3
Jeddah,
Moscow
-
+4 4
Dubai, Abu
Dhabi
-
+5 5 Karachi -
+6 6 Dhaka -
+7 7
Bangkok,
Jakarta
-
+8* 8
Hong Kong,
Singapore
BPC
+9* 9 Tokyo, Seoul JJY
+10 10 Sydney, Guam -
+11 11
Noumea, Port
Vila
-
+12 12
Wellington,
Christchurch
-
+13 13 Nuku’alofa -
+14 14 Kiritimati -
-12 48 Baker Island -
-11 49 Pago Pago -
-10 50
Honolulu,
Papeete
-
-9 51
Anchorage,
Nome
-
-8* 52
Los Angeles,
Vancouver
WWVB
-7* 53
Denver,
Edmonton
-6* 54
Chicago,
Mexico City
-5* 55
New York,
Montreal
-4* 56
Halifax,
Caracas
-3 57
Rio de Janeiro,
Buenos Aires
-
-2 58
Fernando de
Noronha
-
-1 59 Praia -
* Time zones where time calibration signal
reception is possible.
●
The second hand position will be 45 (9
o’clock) if you used your phone to specify a
city whose time offset is not included in the
above table.
●
The information in the above table is current
as of July 2021.
Supported Phones
For information about phones that can
connect with the watch, visit the CASIO
website.
https://world.casio.com/os_mobile/wat/
Specifications
Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by time calibration signal
reception or by communication with a phone
is not possible.
Timekeeping :
Hour, minute, second, day (2000 to 2099
full auto calendar), day of the week
Signal Receive Functions :
Auto receive, manual receive
Auto transmitter selection (for JJY, MSF/
DCF77)
Receivable Call Signs
JJY (40kHz/60kHz), BPC (68.5kHz),
WWVB (60kHz), MSF (60kHz), DCF77
(77.5kHz)
Standard Time
Summer time auto/manual switching
Dual Time :
Current time in one of 27 time zones,* auto
summer time, swapping with Home City
Time
* Subject to updates by connection between
the watch and a phone.
Mobile Link :
Auto Time Correction
Time setting adjusted automatically at
preset time.
One-touch Time Correction
Manual connection and time adjustment
Phone finder
Watch operation sounds the alert sound
of the phone.
World Time
Current time for a selection of
approximately 300 cities
Home Time/World Time swapping
Auto summer time setting
Automatic switching between standard
time and summer time.
Timer Settings
Alarm Settings
Hand alignment correction
Data Communication Specifications
Bluetooth
®
Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)
Watch Operation Guide 5672
27
Stopwatch :
Measuring unit: 1 second
Measuring capacity: 23:59’59” (24 hours)
Measurement functions: Elapsed time, split
times
Timer :
Setting unit: 1 minute
Countdown range: 24 hours
Measuring unit: 1 second
10-second beeper when the end of the
countdown is reached
Alarm :
Setting units: Hours, minutes
Alarm tone duration: 10 seconds
Other :
LED light (Super Illuminator, afterglow),
auto hand position correction, Power
Saving, battery indicator, battery charge
alert
Power Supply :
Solar panel and one rechargeable battery
Approximate Battery Life :
Approximately 5 months
Conditions
Not exposed to light under the conditions
below.
ー
Time adjustment by phone:
4 times/day
ー
Alarm: Once (10 seconds)/day
ー
Illumination: Once (1.5 seconds)/day
Specifications are subject to change without
notice.
Copyrights and Registered
Copyrights
●
The Bluetooth
®
word mark and logos are
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
●
iPhone and App Store are trademarks of
Apple Inc. in the United States and other
countries.
●
iOS is a trademark or registered trademark
of Cisco Systems, Inc.
●
GALAXY is a registered trademark of
Samsung Electronics Co., Ltd.
●
Android and Google Play
TM
are trademarks
or registered trademarks of Google LLC.
●
Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.
Troubleshooting
Signal Reception (Time
Calibration Signal)
Q1
The watch cannot perform a receive
operation.
Is the watch’s battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
l
Charging
Is the watch in the Timekeeping Mode?
The watch cannot receive time calibration
signals while auto adjustment is disabled
or while the watch is in a mode other than
the Timekeeping Mode. Return to the
Timekeeping Mode.
l
Navigating Between Modes
l
Using the Watch in a Medical Facility or
Aircraft
Is your time zone setting correct for your
location?
The watch will not indicate the correct time
if the time zone setting is wrong. Change
your time zone setting so it is correct for
your location.
l
Selecting Your Home City’s Time Zone
After checking the above, the watch still
cannot perform a receive operation.
Time calibration signal reception is not
possible under the conditions described
below.
●
When watch is at Level 2 power saving
●
When the crown is pulled out
●
While the watch is paired with a phone
For information about unpairing, see
“Unpairing”.
If successful reception is not possible for
some reason, you can adjust the time and
day settings manually.
Q2
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
l
Appropriate Signal Reception Location
Did you avoid touching the watch while the
receive operation was in progress?
Minimize movement of the watch and do
not perform any watch operation while a
receive operation is in progress.
Is the signal transmitter in your area
transmitting a signal?
The transmitter of the time calibration may
not be transmitting a signal.
Try again later.
Watch Operation Guide 5672
28
Q3
Signal reception should have been
successful, but the watch’s time and/
or day is wrong.
Is the indicated time off by one hour or by
30 minutes?
The watch may be using the wrong time
offset. Correctly specify the time zone
where you are using the watch.
l
Selecting Your Home City’s Time Zone
Is the indicated hour and/or minute wrong?
The hour hand and/or minute hand may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to auto adjust
hour and minute hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated day of the week wrong?
The day of the week hand (mode hand)
may be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust mode
hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated Dual Time and/or alarm
time wrong?
The Dual Time and/or alarm time hands
(small hour hand, small minute hand) may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust small
hour hand and small minute hand
alignment.
l
Adjusting Hand and Day Indicator
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
l
Using Watch Operations to Adjust the
Time Setting
I can’t pair the watch with a
phone.
Q1
I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install CASIO WATCHES on your
phone?
CASIO WATCHES needs to be installed
on your phone in order to connect with the
watch.
l
A
Install the required app on your
phone.
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
●
“Settings”
n
“Bluetooth”
n
On
●
“Settings”
n
“Privacy”
n
“Bluetooth”
n
“CASIO WATCHES”
n
On
Android Users
●
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCHES. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: “Menu”
n
“Settings”
n
“Bluetooth”
n
“Menu”
n
“BT Smart settings”
n
“Disable”.
I can’t reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCHES running?
The watch cannot re-connect with your
phone unless the CASIO WATCHES app
is running on the phone. On the phone’s
Home Screen, tap the “CASIO
WATCHES” icon. Then on the watch, hold
down (D) until the second hand points to
[C] twice.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3
0
Have you tried turning your phone off and
then back on again?
Turn the phone off and back on, and then
tap the “CASIO WATCHES” icon. Next,
on the watch, hold down (D) until the
second hand points to [C] twice.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3
0
Watch Operation Guide 5672
29
Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while your phone is in the Airplane Mode. After
exiting the phone’s Airplane Mode, go to the
Home Screen and tap the “CASIO
WATCHES” icon. Then on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Q3
I can’t establish a connection after
disabling the watch’s auto time
adjustment feature.
On the watch, enable auto time adjustment,
and then hold down (D) until the second hand
points to [C] twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
3
0
Q4
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, turn Bluetooth off and then back
on, and then tap the “CASIO WATCHES” icon
on the Home Screen. Next, on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Q5
I can’t connect after turning off the
phone.
Turn on the phone and then tap the “CASIO
WATCHES” icon. Next, on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and back on, and then
tap the “CASIO WATCHES” icon. Then on
the watch, hold (D) until the second hand
points to [C] twice.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3
0
Has the watch been re-paired with the
phone?
After deleting pairing information from
CASIO WATCHES, re-pair them.
l
Deleting Pairing Information from
CASIO WATCHES
l
C
Pair the watch with a phone.
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
l
If you purchase another phone
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete. Also, time
signal auto receive will be performed if there
has been no auto time adjustment based on
connection between the watch and phone for
more than one day.
Q2
Auto time adjustment is performed,
but the time setting is not correct.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Watch Operation Guide 5672
30
Q3
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
for some other reason, the watch may not be
able to display the correct time. If this
happens, connect the phone to its network
and then adjust the time setting.
Q4
Time signal reception is not
performed while watch is connected
with a phone.
The watch does not receive a time signal for
time correction while it is connected with a
phone. However, time signal auto receive is
performed if there has been no auto time
adjustment based on connection between the
watch and phone for more than one day.
Alarm
Q1
The alarm does not sound.
Is the watch’s battery charged?
Keep the watch exposed to light until it
recharges sufficiently.
l
Charging
The crown is pulled out.
The alarm will not sound while the crown
is pulled out. Push the crown back in to its
normal position.
Is the alarm enabled?
Enable the alarm.
l
Configuring Alarm Settings
Hand Movement and
Indications
Q1
I don’t know what mode the watch is
in.
You can determine the current mode by
checking the mode hand position. Use (C) to
navigate between modes.
l
Navigating Between Modes
3
0
Q2
The second hand is jumping at two-
second intervals.
Battery power is low. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging
Q3
All hands are stopped and buttons do
not work.
The battery is dead. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging
Q4
The hands suddenly start moving at
high speed.
This is due to the reason (or one of the
reasons) below, and does not indicate
malfunction. Simply wait until normal hand
movement resumes.
●
The watch is recovering from a power
saving state.
l
Power Saving
●
A time calibration signal is being received
and the time setting is being adjusted.
l
Time Adjustment Using a Time Signal
●
Watch is connected with a phone to adjust
its time setting.
l
Auto Time Adjustment
Q5
Hands are stopped and buttons do
not work.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(for about 15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
Q6
Why is the current time indicated by
the watch is off by a certain amount
of time (nine hours, three hours and
15 minutes, etc.)?
The city setting is not correct. Select the
correct setting.
l
Selecting Your Home City’s Time Zone
Q7
The current time indicated by the
watch is off by one hour or 30
minutes.
The summer time setting is not correct. Select
the correct setting.
l
Configuring the Summer Time Setting
(Home City)
Q8
The hand and/or day indicator are not
aligned correctly.
Strong magnetism or impact can cause the
hands and/or the indicator to go out of
alignment. Adjust hand and/or day indicator
alignment.
l
Adjusting Hand and Day Indicator
Alignment
●
Check the information below to find out how
to align the hands and/or day indicator
manually.
l
Adjusting Hand and Day Indicator
Alignment
Watch Operation Guide 5672
31
Crown Operations
Q1
Nothing happens when I rotate the
crown.
If you do not perform any operation for about
two minutes after pulling out the crown
(approximately 30 minutes in the case of hand
and day indicator alignment), crown
operations will automatically become
disabled. Push the crown back in to its normal
position and then pull it out again to re-enable
crown operations.
l
Using the Crown
Other
Q1
I can’t find the information I need
here.
Visit the website below.
https://world.casio.com/support/
Watch Operation Guide 5672
32
