Loading ...
Loading ...
Loading ...
7-3 Failure diagnosis method of ice maker
Yes
r
/"normal after the ice-making tray"""-..._
_,_nd retLIming to the level with the_
Normal I
//
Defectofpower o..ina,
/
• Check DC power (5V,12V)
Defect of ice-making sensor
• Check resistance values of
both ends of ice-making sensor
(Pin for PCB CON2 1,2 PIN)
• Ice-making sensor-Defect
between (PIN NO # 4 of ICl)
boards
Defect of ice-making kit
Resistance values at both
ends of ice-removing motor
(# 7,8 pin of PCB CON2 7,8)
is 18°-22D ?
Drive circuit of ice-removing
motor (IC5 and auxiliary
circuit) is normal?
HALL IC~Defeot between
(PIN NO # 20 of IC1) boards
Be sure ice-removing and
returning to the level when
pressing the TEST SNV
Defect of ice-making KIT TEST 8/W
• Both ends of TEST S/W
(# 3,6 pin of PCB CON2 3,6)
are at open status?
• TEST SNV ~ Defect between
boards (PiN NO #19 of IC1)
Defect of water supply
• Water supply valve conduct
current?
• Water supply pump normally
operates?
• Water supply line is normally
connected?
Replacementof
MAIN PCB
I
Repiacemeot of Iice-making sensor
Replacementof
ice-making kit
Replacement of
MAIN PCB
I
I
Replacementof IIce-making kit
Replacement of Iwater supply valve
- 20 -
Loading ...
Loading ...
Loading ...