User Manual Conair CS33N INFINITIPRO BY Tourmaline Ceramic Flat Iron, 1 1/2-inch

Documents for Conair CS33N

The following documents are available:
User Manual Photos
CS33N photo
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOURE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are
a dangerous combination. But did you know
that an electric appliance is still electrically
live even if the switch is off? If the plug is in,
the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
USER
MAINTENANCE
Your straightening iron is virtually maintenance-
free. No lubrication is needed. Keep all vents
and openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, allow to cool and wipe
exterior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an authorized service
representative only. No repairs should be
attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into the
appliance, causing it to rupture and short circuit.
Inspect the cord frequently for damage. Stop use
immediately if damage is visible or if unit stops
or operates intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug
connections. Do not wrap the line cord
around the appliance. Allow the cord to hang
or lie loose and straight at the point of entry
into the appliance.
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or Infiniti by Conair
product call 1-800-3-CONAIR or visit us on the web
at: www.conair.com/infiniti
©2009 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
Patent Pending
08NP10513
IB-8912
TURNS CURLS INTO
SMOOTH HAIR IN SECONDS
LIMITED FIVE-YEAR WARRANTY
Conair will repair or replace (at our option) your
unit free of charge for 60 months from the date
of purchase if the appliance is defective in work-
manship or materials.
To obtain service under this warranty, return
the defective product to the service center list-
ed below, together with your purchase receipt
and $7.00 for postage and handling. California
residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a purchase
receipt, the warranty period shall be 5 years
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 60-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special, inci-
dental, or consequential damages, so the above
limitation may not apply to you.
This warranty gives you specific legal rights, and
you may also have other rights, which vary from
state to state.
GET TO KNOW YOUR
STRAIGHTENING IRON
Before After
Instant heat
technology
Ceramic heater
BONUS
Heat Shield
Storage Pouch
Auto off
Uniform heat
recovery system
5 ultra-high
heat levels
with LED
temperature
display
Ultra-slim
Design
Stainless
steel finish
New extra long floating plates
for faster, better results
Instruction & Styling Guide
Model CS31/32/33XR
For your safety and
continued enjoyment of
this product, always
read the instruction
book carefully
before using.
Tourmaline
coated pure
ceramic
plates
tourmaline-coated
pure ceramic
straightener
Loading ...
Loading ...
Loading ...