Broan ERV200TE User Guide

Loading ...

4. Maintenance (cont’d)

4.2 annual Maintenance (cont’d)

7. Slide the cleaned core into the unit.

8. Slide the cleaned filters into the unit.

9. Close the unit door.

10. Clean the exterior hoods, then plug back the unit.

NOTE: The unit will return to its previous setting after a 30-second delay for booting

sequence.

11. Reset the Maintenance Indicator by pressing simultaneously on both

MODE and TURBO keys for 3 seconds on VT9W main wall control; this

will erase the maintenance icon from the screen.

Heat RecoveRy coRe cleaning eneRgy RecoveRy coRe cleaning

Allow the heat recovery core to soak for

3 hours in a solution of warm water and

mild soap (liquid soap).

Rinse lightly, let dry and reinstall.

Remove the dust on the core using

a vacuum cleaner and a soft brush

attachment.

CAUTION

Do not soak the energy recovery core in water. This core can easely be

damaged especially if it is soaked.

6. Clean the core (refer to table below).

MODE



VQ0135A

TURBO



AND

3 sec.

Loading ...

Broan ERV200TE HE Series Energy Recovery Ventilator, 210 CFM at 0.4 in. w.g