Greenworks CS40L210 40V 14" Brushless Cordless Chainsaw Great For Storm Clean-Up, Pruning, and Firewood / 60+ Compatible Tools, 2.0Ah Battery and Charger Included

User Manual - Page 9

For CS40L210.

PDF File Manual, 36 pages, Read Online | Download pdf file

CS40L210 photo
Loading ...
Loading ...
Loading ...
WARNING
If the battery pack or charger is damaged, replace the
battery pack or the charger.
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4 REMOVE THE BATTERY PACK
1. Push and hold the battery release button (18).
2. Remove the battery pack from the machine.
9 OPERATION
NOTE
Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
IMPORTANT
Examine the chain tension before each use.
9.1 EXAMINE THE CHAIN OIL
NOTE
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add oil if necessary.
9.2 HOLD THE MACHINE
1. Hold the chainsaw with your right hand on the rear
handle and left hand on the auxiliary handle.
2. Hold the handles with the thumbs and the fingers around
them.
3. Make sure that your left hand holds the auxiliary handle
and your thumb is below the handle.
9.3 START THE MACHINE
1. Press the lock-out button (4).
2. Press the trigger (5) while you hold the lock-out button.
3. Release the lock-out button.
IMPORTANT
The chain brake must be disengaged for the chain saw to
start. Activate the brake by moving the hand guard
forwards.
9.4 STOP THE MACHINE
1. Release the trigger to stop the machine.
9.5 OPERATE THE CHAIN BRAKE
WARNING
Make sure that your hands are on the handles at all times.
1. Start the machine.
2. Push the guard forward to to engage the chain brake.
3. Pull the handle guard / chain brake backwards to
disengage the chain brake.
4. Call approved service center for repair before use if
The chain brake does not stop the chain immediately.
The chain brake does not stay in the disengaged
position without aid.
9
English
EN
Loading ...
Loading ...
Loading ...