Loading ...
Loading ...
4. If higher power is desired, rotate the
objective lens housing (3) to the 3x
position and refocus until the specimen
becomes sharp. You can also replace
the WF 10x eyepieces with the WF
20x eyepieces to obtain two additional
magnifications powers, including 60x, the
highest power possible.
NOTE: You may need to adjust the
interpupillary distance of the eyepieces
for better viewing. Rotate the eyepieces
up and down to adjust the eyepiece
distance. Close your right eye and
turn the left eyepiece diopter (7) until
the image is in sharp focus through
the eyepiece. Now the interpupillary
distance is set and you will only focus
with the focus knob (9).
ILLUMINATION
Your stereo microscope has two illumination
settings for viewing a specimen: a bottom
illuminator (Setting 1) and a top illuminator
(Setting 2). The bottom illuminator should
be used in conjunction with the translucent
glass stage plate (5). The translucent
stage plate allows light to pass through
the plate and illuminate the specimen from
below. The opaque (black/white) stage
plate is more optimal when using the top
illuminator. The opaque stage plate can
help you improve contrast on specimens for
better viewing. You should experiment with
the different illumination options to find
what works best for your specimen.
NOTE: You can further illuminate a specimen
by using an additional source of lighting
such as, a desk lamp, table lamp, bright
overhead light, or natural light.
CARE, MAINTENANCE AND
WARRANTY
Your Celestron Labs microscope is a
precision optical instrument and should be
treated with care at all times. Follow these
care and maintenance suggestions and your
microscope will need very little maintenance
throughout its lifetime.
• When you are done using your
microscope, remove any specimens left
on the stage.
• Turn off the power and unplug the power
cord (if applicable).
• Always place the plastic bag or dust cover
over the microscope when not in use to
help keep it clean.
• Store the microscope in a dry, clean place.
• Be very careful if using your microscope
in direct sunlight to prevent damage to
the microscope or your eyes.
• To carry your microscope, place one hand
on the “arm” of the microscope and the
other hand under the base for support. Do
not grasp your microscope by the focuser
knob or head.
• Clean the outside surfaces (metal and
plastic) with a moist cloth.
• Always unplug any cords before cleaning.
• Never clean optical surfaces with cloth or
paper towels as they can scratch optical
surfaces easily. Instead, use an air blower
or camel hair brush.
• To clean fingerprints off of optical
surfaces, use a lens cleaning agent
and lens tissue available at most photo
supply stores. When cleaning, do not rub
in circles as this may cause streaks or
scratches.
• Never disassemble your microscope or
clean internal optical surfaces. Only
qualified technicians at the factory or an
authorized repair facility should attempt
these repairs.
• When handling glass specimen slides, use
care, as the edges can be sharp.
YOUR MICROSCOPE HAS A
TWO YEAR LIMITED WARRANTY.
for more detailed information, please visit
www.CelestonLabs.com
Torrance, CA 90503
TEL (800) 421-9649
www.CelestonLabs.com
Copyright 2014 Celestron | All rights
reserved.
(Products or instructions may change without
notice or obligation.)
Designed and intended for those 14 years of
age and older.
Loading ...
Loading ...
Loading ...