Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGCHART
PROBLEM CAUSE CORRECTION
Excessive
vibration
Starterropehard
topull
1. Replaceblade. "13ghten
bladebolt.
2. Contactan authorized
servicecenter.
1. Wom, bent or loose blade.
2. Bent engine crankshaft.
1. Engine flywheel brake is on
when control bar is released.
2. Bent engine crankshaft.
3. Blade adapter broken.
4. Blade dragging in grass.
Cutting height too low.
Lift on blade wom off.
Catcher not venting air.
Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.
1. Depress control bar to
upper handle before
pulling starter rope.
J2. Contact an authorized
service canter.
3. Replace blade adapter.
4. Move lawn mower to cut
grass or to hard surface
Grass catcher 1. 1. Raise cuttingheight.
notfllling('d'so 2. 2. Replace blade.
equipped) 3. 3. Clean grasscatcher.
Hard to push 1. 1. Raise cuttingheight.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
18
Loading ...
Loading ...
Loading ...