Loading ...
Loading ...
Loading ...
7
Full-range Speaker (Rear)
q Tiltable pole socket
This mount has two pole sockets. You can choose the
angle of the speaker so that it is positioned horizontal to
the floor or tilting down toward the floor by 7 degrees.
Compatible with commercially available speaker stands
and speaker poles of 35 mm diameter. (These sockets are
not available on the DZR315(-D).)
w Screw holes for U-bracket
For installing with the separately sold U-brackets. (These
sockets are not available on the DZR315(-D).)
e Screw holes for eye bolts
For installing the speaker using eye bolts. The screw holes
for eye bolts go through the cabinet wall.
Subwoofer (Rear)
r Dual pole sockets
Compatible with commercially available speaker poles of
35 mm diameter and M20 screw.
When using a pole socket to install a speaker, observe the
following conditions for safety.
t Feet cups
When stacking multiple speakers, align the rubber feet of
the upper speaker to the feet cups of the lower one.
y Wheel mounting screws
For installing the separately sold Yamaha SPW-1 wheels. If
you are not using wheels, do not remove these screws.
Otherwise, the leakage of air will affect sound quality.
w
q
e
Bottom
FRONT
7°
0°
7°
Pole socket
Subwoofer Speaker to be installed Length of the pole
DXS18XLF(-D)
Weight: 26 kg or less
Height: 76.0 cm or less
(DZR15(-D) or smaller)
104 cm or less
DXS15XLF(-D)
Weight: 22 kg or less
Height: 64.5 cm or less
(DZR12(-D) or smaller)
82 cm or less
Weight: 18 kg or less
Height: 53.7 cm or less
(DZR10(-D) or smaller)
104 cm or less
• For more information about installing wheels and related pre-
cautions, refer to the corresponding manual for the wheels.
• Do not install any item other than the SPW-1 wheels.
t
y
r
35 mm
diameter
M20 screw
NOTE
Functions
Full range
Subwoofer
Loading ...
Loading ...
Loading ...