OWNER’S MANUAL - Page 7

For 65QNED80URA. Series: URA
Also, The document are for others LG Electronics models: 43QNED75ARA, 43QNED75URA, 50QNED75ARA, 50QNED75URA, 50QNED80ARA, 50QNED80URA, 55QNED75ARA, 55QNED75URA, 55QNED80ARA, 55QNED80URA, 55QNED85ARA, 55QNED85URA, 65QNED75ARA, 65QNED75URA, 65QNED80ARA, 65QNED85ARA, 65QNED85URA, 75QNED75ARA, 75QNED75URA, 75QNED80ARA, 75QNED80URA, 75QNED85ARA, 75QNED85URA, 86QNED80ARA, 86QNED80URA, 86QNED85ARA, 86QNED85URA, 43UR8000AUA, 43UR8000AUB, 43UR9000PUA, 50UR8000AUA, 50UR8000AUB, 50UR9000PUA, 50UR9000PUB, 55UR8000AUA, 55UR8000AUB, 55UR9000PUA, 65UR8000AUA, 65UR8000AUB, 65UR9000PUA, 70UR8000AUA, 70UR8000AUB, 75UR8000AUA, 75UR8000AUB, 75UR9000PUA, 75UR9000PUB, 86UR8000AUA, 86UR8000AUB, 86UR8000PUB, 86UR9000PUA

Loading ...
Loading ...
Loading ...
7
USB
Some USB Hubs may not work. If a USB device connected through a USB Hub
is not detected, connect it directly to the USB port on the TV. (Depending
upon model)
Note
For an optimal connection, HDMI cables and USB devices should have
bezels less than 10mm (0.39inches) thick and 18mm (0.7inches)
width. (Depending upon model)
Use an extension cable that supports if the USB cable or USB
flash drive does not fit into your TV’s USB port.
IR Blaster
Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,
soundbar, game consoles, etc., using the IR Blaster (Depending upon country)
(Depending upon model).
Note
Connect the IR Blaster cable to the TV’s IR Blaster port.
Use universal control settings to control the device.
Secure the IR Blaster with the 3M tape provided.
In order to control external devices through "Room to Room Share" and
"Hands-free Voice Control", an IR blaster connection is required.
External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and other
external devices. For more information on external device’s connection, refer
to the manual provided with each device.
Note
The external device connections shown may differ slightly from
illustrations in a manual.
In PC mode, there may be noise associated with the resolution, vertical
pattern, contrast or brightness. If noise is present, change the PC output
to another resolution, change the refresh rate to another rate or adjust
the brightness and contrast on the [Picture] menu until the picture is
clear. Depending upon the graphics card, some resolution settings may
not allow the image to be positioned on the screen properly.
When connecting to a wired LAN, use a CAT 7 cable with high-speed
Internet transmission. (Only when port is provided.)
The TV may be capable of operating without a set-top-box from a
multichannel video programming distributor (MVPD).
Remote RS-232C setup
To obtain the RS-232C external control setup information, please visit www.
lg.com. Download and read the manual, (Depending upon model).
Do not drop the product or let it fall over when connecting external
devices. Otherwise, this may result in injury or damage to the product.
When connecting external devices such as video game consoles, make
sure the connecting cables are long enough. Otherwise, the product may
fall over, which may cause injury or damage the product.
Loading ...
Loading ...
Loading ...