Loading ...
Loading ...
Loading ...
5 Remove the red packing strip from the top of the photoconductor.
6 Close the front door.
Resetting the maintenance counter
Reset the maintenance counter after installing a new photoconductor.
When a “replace” or “low” message appears
Follow this procedure when a photoconductor is replaced and 84 Replace [color] photoconductor, 84
[Color] photoconductor nearly low, or 84 [Color] photoconductor low appears:
1 From the printer control panel, navigate to:
> Status/Supplies > > Supply Replaced >
or
> Status/Supplies > Supply Replaced
2 When Replaced [color] photoconductor appears, select Yes. For non‑touch‑screen printer models,
press
to confirm.
Notes:
• Make sure to replace all four photoconductors at the same time.
• When Ready appears, the counter is reset.
Maintaining the printer 183
Loading ...
Loading ...
Loading ...