Loading ...
Loading ...
Loading ...
User Guide 608
Configuring DHCP Service Configuration Examples
Figure 5-34 Configuring Port 1/0/1
3) On the same page, select port 1/0/2, enable Optionî™»82 Support and select Optionî™»82
Policy as Replace. You can configure other parameters according to your needs. In this
example, keep Format as Normal and Remote ID Customization as Disabled. Enable
Circuit ID Customization and specify the Circuit ID as Group2. Click Apply.
Figure 5-35 Configuring Port 1/0/2
4) Click to save the settings.
Using the CLI
1) Enable DHCP L2 Relay globally and on VLAN1.
Switch#configure
Loading ...
Loading ...
Loading ...