Loading ...
Loading ...
Loading ...
12
Gas Connection
INSTALLATION
MANUAL SHUT-OFF VALVE
• This valve is not shipped with the appliance and must be provided by the installer.
• The valve must be installed in the gas service line between the gas hook-up on the wall
and the appliance inlet, in a position where it can be reached quickly in the event of an
emergency.
• In Massachusetts: A T-handle type manual gas shut-off valve must be installed in the
gas supply line to this appliance.
FLEXIBLE CONNECTIONS
• In case of installation with flexible couplings and/or quick-disconnect fittings, the
installer must use a heavy duty, AGA design-certified commercial flexible connector of
at least 1/2˝ (1.3cm) NPT with a suitable strain relief in compliance with ANSI Z21.41
and Z21.69 standards.
• In Massachusetts: The unit must be installed with a 36˝ flexible gas connector.
• In Canada: Use CAN 1-6, 10-88 metal connectors for gas appliances and CAN
1-6.9, M79 quick disconnect devices for use with gas fuel.
PRESSURE TEST POINT STOPPER VALVE
To avoid gas leaks, the pressure test-point stopper valve and gasket supplied with the
range is already installed on the gas fitting at the back of the range according to the
diagram below.
Gas pipe
Gasket
Gas connection adaptor 1/2” NPT with
pressure test point 1/8” NPT (to be fixed
toward external side of the appliance)
Pressure test-point stopper
Loading ...
Loading ...
Loading ...