Loading ...
Loading ...
Loading ...
The assembled cleaner will look like this
drawing (Ultra modet shown).
3
Attach upper handle
_ emove clean solution tank (upper
tank) from deep cleaner.
!
B With cord hook (A) to back of deep
cleaner, push upper handle down onto
lower handle, Push bolts into holes or_
front of handle. If bolts will not go
through hole easily handle is not pushed
completely down.
_ lace nuts in recessed areas on
back of handle. Hold each nut in
place while tightening each bolt securely
with a Phillips screw driver,
Only two nuts are needed on this model.
The extra nut is not required but has
been provided for your convenience.
[]
B
DWhen handle sections are complete
ly together, squeeze trigger (B) on
upper handle to snap trigger rod In
place.
D Replace clean solution tank (upper
tank) by positioning bottom first,
Press on tank handle to snap top of
tank into place,
U
[]Press cord into cord clip on back of
handle. Pull cord tight. Attach hose clip
I_sPUSh tab on side of clip into hole on
ide of handle.
[_ ivot clip and push other tab into
hole at back of handle to lock into
place.
Loading ...
Loading ...
Loading ...