Loading ...
Loading ...
Loading ...
ASSEMBLY OF HEATER
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to prevent
damage to the cosmetic finish or your floor surfacing.
Attach the feet to the base of the heater by aligning the built-in position pins with the position holes on the
base of the heater and fixing a screw into the hole between the two position holes. Use one screw for each
foot.
Castors shown below in correct operation position
Before first use you need to set the castor wheels to
the widest position. To do this slide each wheel out
from the main body until they cannot go any further
and then tighten the screws to lock them in position.
Repeat this for the rear castors.
WARNING: Heater must not be used without the feet, castors, and the
wheels fitted.
Assembly Instructions
Loading ...
Loading ...
Loading ...