Loading ...
Loading ...
Loading ...
/
35 / 44
EN
Operating the product
Cancellng (Resettng) the
program
With the door closed, press the Start/
Pause/Cancel button for 3 seconds. Display
shows 0:01 after a 3 - 2 - 1 countdown. Wait
for discharge to complete. The discharge
is completed within 2 minutes and your
machine will sound an audible warning
when it is completed.
C
Detergent or rinse aid may
remain inside the machine and/
or the dishes being washed as
per the step of the program you
have cancelled.
Low Salt Warnng ndcator (
)
Check the low salt warning indicator on the
display to determine if the softening salt
available in your machine is adequate. You
shall add salt to the salt compartment when
the low salt warning indicator on the display
starts to illuminate.
C
Setting of water hardness
level is described in the Water
Softening System section.
Low Rnse Ad Warnng
ndcator ( )
Check the low rinse aid warning indicator
on the display to determine if the rinse
aid available in your machine is adequate.
You shall add rinse aid to the rinse aid
compartment when the low rinse aid
warning indicator on the display starts to
illuminate.
End of programme
C
For energy saving, the machine
is automatically turned off
following the completion of the
programme or if the programme
is not started.
C
Leave your dishes in the
machine for about 15 minutes
to allow them cool down after
they are washed. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
Settng the Rnse ad
Amount
1. When the door is closed, after turning
on your machine with the On/Off
button, enter the Sub-Menu by
pressing the On-Off and P2 program
buttons simultaneously for 3 seconds.
2. Go to "P" position on the display by
pressing the P2 button.
3. Set it to the appropriate
level by selecting one of the
“P:0”,“P:1”,“P:2”,“P:3” or “P:4” positions
with the P3 program button.
4. Exit the settings menu by pressing
the On/Off button for 3 seconds. Your
settings will be saved automatically.
No rinse aid is applied in washing
program at P:0 position.
1 dose of rinse aid is applied at P:1 position.
2 dose of rinse aid is applied at P:2 position.
3 dose of rinse aid is applied at P:3 position.
4 dose of rinse aid is applied at P:4 position.
Loading ...
Loading ...
Loading ...