Loading ...
Loading ...
SAFETY GUIDELINES
This manual contains information that is important for you to know and understand. This information relates to
protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information,
we use the following symbols. Please read the manual and pay attention to these sections.
URGENT SAFETY INFORMATION - A
HAZARD THAT WILL CAUSE
SERIOUS INJURY OR LOSS OF LIFE.
IMPORTANT SAFETY INFORMATION -
A HAZARD THAT MIGHT CAUSE
SERIOUS INJURY OR LOSS OF LIFE.
Information for preventing damage to
equipment.
NOTE
Information that you should pay special
attention to.
WHAT TO
LOOK FOR
Hot Parts
Flammable
Vapors
Air Tank
HAZARDS CAN OCCUR IF EQUIPMENT IS NOT USED PROPERLY.
PLEASE READ THE FOLLOWING CHART.
WHAT COULD HAPPEN
Themetalcompressor components such asmanifold,
tubes,etc,becomehotwhentheaircompressorisrunning.
Ifyoutouchthem, you
may be seriously burned.
It isnormal for the motor and pressure switch to spark
when compressor starts or stops. A spark can ignite
vapors from gasoline or solvents, causing a fire or
explosion.
Modifications to air compressor components in an
attempt to reach higher air pressure can cause the air
tank to rupture or explode.
Incomparability between tank and compressor will
cause the tank to rupture.
Modifications to the airtank will cause it to weaken.
HOW TO PREVENT IT
Avoid contact withmetal components ofthe compressor
during or immediately after operation. Reaching under or
removing portions of the plastic enclosures such as the
console cover exposes hot surfaces. Allowcompressorto
cool prior to servicing.
If spraying aflammable material, provide ample ven-
tilation. Never spray in a closed area. There must be
a flow of fresh air at all times.
Always operate the air compressor in well-ventilated
areas, free of gasoline or other solvent vapors. Do not
operate the compressor near the spray area.
Do not adjust, remove or tamper with the safety valve
or pressure switch. If safety valve or pressure switch
replacement is necessary, a part with the same ratings
must be used.
Never replace the air tank with a different model or a
larger tank. Return to Authorized Service Center if
replacement is required.
Never drill into weldor in anyway modify theairtank.
Thetank may rupture or explode. Ifleaks deveop due
tocorrosion or tank isdamaged, return to Authorized
Service Center for replacement.
Loading ...
Loading ...
Loading ...