Loading ...
Loading ...
Loading ...
7
Preparing
Details for Installation
Installing the Stand
When installing the stand, maintain a distance of at least 10 cm (4 inches)
between the stand and the ceiling and the left and right walls, and at least 10 cm
(4 inches) between the stand and the back wall.
• When assembling or removing the stand, hold the stand while tightening or
loosening the screws. The stand may fall and cause product damage or injury.
10cm
10cm
10cm
(4inches)
• The product is heavy; make sure at least two people work together
when unpacking or moving it. Do not lay the product down flat;
instead, move it in an upright position. The product may fall and
cause product failure or injury.
Pole Deco
• Be careful not to get your hands or fingers stuck in the stand or
the height adjustment area. In addition, if the product is tilted
excessively, it may fall and cause injury.
• Do not move the product by holding the Pole Deco on the upper
side of the stand. Hold the stand in the middle and pull it.
- Moving the product by holding the Pole Deco may cause the
Pole Deco to break, potentially resulting in product damage
or injury.
• Do not use foreign substances (oil, lubricant, etc.) on the screws
when assembling the product.
- It may cause product damage.
• Do not remove the cable holder and screws after installing the
product.
• If the Pole Deco is stained with foreign substances such as
cosmetics, gently wipe it with a clean wet wipe or cloth.
Loading ...
Loading ...
Loading ...